Zune Flash 2Nd Generation Back Cover Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          5 - 10 minutes            

Sections

1

• Back Cover
• 5 steps

Flags

Inconsistent Images

Updating the images on this guide to be more consistent with the prerequisites would increase its awesomeness.

• BackZune Flash 2nd Generation

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Back Cover               

• Prior to disassembly, verify the hold switch is engaged to ensure the device will not turn on during the procedure.
• If the device turns on while it is being disassembled it could cause irreversible damage to the device.
• PICS MAKE NO SENSE.

Prior to disassembly, verify the hold switch is engaged to ensure the device will not turn on during the procedure.

If the device turns on while it is being disassembled it could cause irreversible damage to the device.

PICS MAKE NO SENSE.

1024

Step 2

• Remove the top metal clip by inserting a Zune opening tool in between the faceplate and back cover and pulling gently back as shown in the images.
• You should hear a ‘click’ as the clip detaches from the device.

Remove the top metal clip by inserting a Zune opening tool in between the faceplate and back cover and pulling gently back as shown in the images.

You should hear a ‘click’ as the clip detaches from the device.

Step 3

• Remove the two screws shown using a small Tri-Wing screwdriver.
• You will need to use a very small Tri-Wing screwdriver to ensure that you do not strip the screws.

Remove the two screws shown using a small Tri-Wing screwdriver.

You will need to use a very small Tri-Wing screwdriver to ensure that you do not strip the screws.

Step 4

• Insert the Zune opening tool between the faceplate and the back cover, starting from the top and slowly work your way around the device.

Insert the Zune opening tool between the faceplate and the back cover, starting from the top and slowly work your way around the device.

Step 5

• Work your way around the Zune until the back cover comes free. Remove the back plate and set it aside.

Work your way around the Zune until the back cover comes free. Remove the back plate and set it aside.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 6 other contributors 

                    ybahman                     

Member since: 11/01/2009

136 Reputation

                                      4 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       Cal Poly, Team 9-20, Regan Fall 2009                        

                                                  Member of Cal Poly, Team 9-20, Regan Fall 2009 



                    CPSU-REGAN-F09S9G20                     


                                            5 Members                     


                                            7 Guides authored