Difficulty

Moderate

Steps

6

Time Required

                          15 minutes

Sections

1

  • Front-Facing Camera
  • 6 steps

Flags

0

  • BackZTE ZFive G LTE

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Front-Facing Camera
  • Using the opening tool, pry open the rear cover from the crease at the bottom left corner.

Using the opening tool, pry open the rear cover from the crease at the bottom left corner.

1024

Step 2

  • Remove the battery with an opening tool or fingernail.

Remove the battery with an opening tool or fingernail.

Step 3

  • Unscrew all 16 screws from the mid-frame J000 screwdriver.
  • Set the screws aside.

Unscrew all 16 screws from the mid-frame J000 screwdriver.

Set the screws aside.

Step 4

  • Gently pull up the device body from the inside.
  • Make sure to pull on all four sides as shown here.

Gently pull up the device body from the inside.

Make sure to pull on all four sides as shown here.

Step 5

  • Once the body is removed, you will see the front facing camera at the top right corner of the device.
  • Using an opening tool, lift up the protective clip on top of the camera’s ribbon wire.

Once the body is removed, you will see the front facing camera at the top right corner of the device.

Using an opening tool, lift up the protective clip on top of the camera’s ribbon wire.

Step 6

  • Using angled tweezers, gently pull the ribbon wire up from the body.
  • With the ribbon wire out, you should be able to remove the camera.
  • If there is adhesive on the camera backing, it may require more force to pull the camera out.

Using angled tweezers, gently pull the ribbon wire up from the body.

With the ribbon wire out, you should be able to remove the camera.

If there is adhesive on the camera backing, it may require more force to pull the camera out.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Julian Mendoza

Member since: 09/21/2018

725 Reputation

                                      5 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       University of North Texas, Team S1-G1, Riccardelli Fall 2018                        

                                                  Member of University of North Texas, Team S1-G1, Riccardelli Fall 2018 



                    UNT-RICCARDELLI-F18S1G1                     


                                            4 Members                     


                                            10 Guides authored