Difficulty
Moderate
Steps
6
Time Required
20 - 25 minutes
Sections
1
- Back Camera
- 6 steps
Flags
0
BackZTE ZFive G LTE
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Camera
- Pry open back cover of the device from the crease at the bottom left corner with an opening tool or fingernail.
Pry open back cover of the device from the crease at the bottom left corner with an opening tool or fingernail.
1024
Step 2
- Remove all 16 screws with a J000 screwdriver.
Remove all 16 screws with a J000 screwdriver.
Step 3
- Remove the battery with an opening tool or fingernail.
Remove the battery with an opening tool or fingernail.
Step 4
- Gently pry open the device body by tugging from the inside out, be sure to pull up and away from device.
Gently pry open the device body by tugging from the inside out, be sure to pull up and away from device.
Step 5
- Once body is removed, back-facing camera is placed at the top left corner of device.
- Using an opening tool, pull up the tab of the camera wire ribbon.
Once body is removed, back-facing camera is placed at the top left corner of device.
Using an opening tool, pull up the tab of the camera wire ribbon.
Step 6
- Using the blunt-nose tweezers, tug at the camera gently, switching sides to remove adhesive little by little, pull camera out gently.
Using the blunt-nose tweezers, tug at the camera gently, switching sides to remove adhesive little by little, pull camera out gently.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Julian Mendoza
Member since: 09/21/2018
725 Reputation
5 Guides authored
Badges:
9
+6 more badges
Team
University of North Texas, Team S1-G1, Riccardelli Fall 2018
Member of University of North Texas, Team S1-G1, Riccardelli Fall 2018
UNT-RICCARDELLI-F18S1G1
4 Members
10 Guides authored