Zte Tempo Front Screen Assembly Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

                          1 hour            

Sections

2

• Battery
• 2 steps
• Front Screen Assembly
• 4 steps

Flags

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

• BackZTE Tempo

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Use a plastic opening tool to pry open the back case.
• Use a Phillips #0 screwdriver to remove the eight 5mm screws.
• Use a plastic opening tool to remove the midframe.

Use a plastic opening tool to pry open the back case.

Use a Phillips #0 screwdriver to remove the eight 5mm screws.

Use a plastic opening tool to remove the midframe.

1024

Step 2

• Use a plastic opening tool to lift the press-fit connector up and disconnect the battery ribbon cable.
• Lift the battery up and remove it from the phone.

Use a plastic opening tool to lift the press-fit connector up and disconnect the battery ribbon cable.

Lift the battery up and remove it from the phone.

Step 3

              Front Screen Assembly               

• Use the plastic opening tool to unplug the three connectors.

Use the plastic opening tool to unplug the three connectors.

Step 4

• Use the plastic opening tool to push up on the wire to remove it completely.

Use the plastic opening tool to push up on the wire to remove it completely.

Step 5

• Insert and slide the plastic opening tool alongside the seam, gently wiggling the opening tool to open and remove the motherboard.

Insert and slide the plastic opening tool alongside the seam, gently wiggling the opening tool to open and remove the motherboard.

Step 6

• Use the metal spudger to push up to remove the volume control.
• Use the tweezers to remove the front speaker and bottom controller.

Use the metal spudger to push up to remove the volume control.

Use the tweezers to remove the front speaker and bottom controller.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 6 other contributors 

                    omar                     

Member since: 10/02/2018

717 Reputation

                                      5 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       Eastern Washington University, Team S2-G3, Munoz Fall 2018                        

                                                  Member of Eastern Washington University, Team S2-G3, Munoz Fall 2018 



                    EWU-MUNOZ-F18S2G3                     


                                            4 Members                     


                                            12 Guides authored