Zte Speed Motherboard Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

                          2 minutes            

Sections

1

• Motherboard
• 6 steps

Flags

0

• BackZTE Speed

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Motherboard               

• Pull off back cover at bottom right corner.

Pull off back cover at bottom right corner.

1024

Step 2

• Remove the seven 3.175mm Phillips head screws from the inner back located at the top, upper-middle-right, middle-right, lower-right, and bottom.

Remove the seven 3.175mm Phillips head screws from the inner back located at the top, upper-middle-right, middle-right, lower-right, and bottom.

Step 3

• With the plastic opening tool the spudger, gently pry off the inner back.
• Be careful not to pry it off too hard, as it is just a plastic covering.

With the plastic opening tool the spudger, gently pry off the inner back.

Be careful not to pry it off too hard, as it is just a plastic covering.

Step 4

• Remove the one 2.381mm Phillips head screw from the motherboard located in the upper-middle part of the phone next to the bottom left corner of the back camera.

Remove the one 2.381mm Phillips head screw from the motherboard located in the upper-middle part of the phone next to the bottom left corner of the back camera.

Step 5

• Using the spudger, gently pry up all ZIF connectors
• ZIF connectors have a tiny tab that needs to be flipped up in order to safely remove the cable
• Using same spudger, gently pry up the orange flat top connector

Using the spudger, gently pry up all ZIF connectors

ZIF connectors have a tiny tab that needs to be flipped up in order to safely remove the cable

Using same spudger, gently pry up the orange flat top connector

Step 6

• Carefully take off motherboard.

Carefully take off motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 3 other contributors 

                    Garrett Barry                     

Member since: 03/04/2016

722 Reputation

                                      5 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       UMass Dartmouth, Team 6-3, Bhusal Spring 2016                        

                                                  Member of UMass Dartmouth, Team 6-3, Bhusal Spring 2016 



                    UMASSD-BHUSAL-S16S6G3                     


                                            3 Members                     


                                            10 Guides authored