Difficulty

Moderate

Steps

7

Time Required

                          2 minutes

Sections

2

  • Motherboard
  • 6 steps
  • Headphone Jack
  • 1 step

Flags

1

Missed a Step

Oops! This guide is currently missing some important steps.

  • BackZTE Speed

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Motherboard
  • Pull off back cover at bottom right corner.

Pull off back cover at bottom right corner.

1024

Step 2

  • Remove the seven 3.175mm Phillips head screws from the inner back located at the top, upper-middle-right, middle-right, lower-right, and bottom.

Remove the seven 3.175mm Phillips head screws from the inner back located at the top, upper-middle-right, middle-right, lower-right, and bottom.

Step 3

  • With the plastic opening tool the spudger, gently pry off the inner back.
  • Be careful not to pry it off too hard, as it is just a plastic covering.

With the plastic opening tool the spudger, gently pry off the inner back.

Be careful not to pry it off too hard, as it is just a plastic covering.

Step 4

  • Remove the one 2.381mm Phillips head screw from the motherboard located in the upper-middle part of the phone next to the bottom left corner of the back camera.

Remove the one 2.381mm Phillips head screw from the motherboard located in the upper-middle part of the phone next to the bottom left corner of the back camera.

Step 5

  • Using the spudger, gently pry up all ZIF connectors
  • ZIF connectors have a tiny tab that needs to be flipped up in order to safely remove the cable
  • Using same spudger, gently pry up the orange flat top connector

Using the spudger, gently pry up all ZIF connectors

ZIF connectors have a tiny tab that needs to be flipped up in order to safely remove the cable

Using same spudger, gently pry up the orange flat top connector

Step 6

  • Carefully take off motherboard.

Carefully take off motherboard.

Step 7

              Headphone Jack
  • Flip over motherboard to locate headphone jack circuit.

Flip over motherboard to locate headphone jack circuit.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Garrett Barry

Member since: 03/04/2016

722 Reputation

                                      5 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       UMass Dartmouth, Team 6-3, Bhusal Spring 2016                        

                                                  Member of UMass Dartmouth, Team 6-3, Bhusal Spring 2016 



                    UMASSD-BHUSAL-S16S6G3                     


                                            3 Members                     


                                            10 Guides authored