Difficulty
Moderate
Steps
4
Time Required
1 minute
Sections
1
- Front and Back Camera
- 4 steps
Flags
0
BackZTE Speed
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Front and Back Camera
- Pull off back cover at bottom right corner.
Pull off back cover at bottom right corner.
1024
Step 2
- Remove the seven 3.175mm Phillips head screws from the inner back located at the top, upper-middle-right, middle-right, lower-right, and bottom.
Remove the seven 3.175mm Phillips head screws from the inner back located at the top, upper-middle-right, middle-right, lower-right, and bottom.
Step 3
- With the plastic opening tool the spudger, gently pry off the inner back seal around the phone.
- Be careful not to pry it off too harsh, as it is just plastic.
With the plastic opening tool the spudger, gently pry off the inner back seal around the phone.
Be careful not to pry it off too harsh, as it is just plastic.
Step 4
- With the spudger, gently pry off camera at the top-middle of the phone to get back camera.
- With the spudger, gently pry off camera at the top-left of the phone to get the front camera.
With the spudger, gently pry off camera at the top-middle of the phone to get back camera.
With the spudger, gently pry off camera at the top-left of the phone to get the front camera.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 4 other contributors
Garrett Barry
Member since: 03/04/2016
722 Reputation
5 Guides authored
Badges:
9
+6 more badges
Team
UMass Dartmouth, Team 6-3, Bhusal Spring 2016
Member of UMass Dartmouth, Team 6-3, Bhusal Spring 2016
UMASSD-BHUSAL-S16S6G3
3 Members
10 Guides authored