Difficulty

Moderate

Steps

7

Time Required

                          2 minutes

Sections

2

  • Motherboard
  • 6 steps
  • Earpiece Speaker
  • 1 step

Flags

0

  • BackZTE Speed

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Motherboard
  • Pull off back cover at bottom right corner.

Pull off back cover at bottom right corner.

1024

Step 2

  • Remove the seven 3.175mm Phillips head screws from the inner back located at the top, upper-middle-right, middle-right, lower-right, and bottom.

Remove the seven 3.175mm Phillips head screws from the inner back located at the top, upper-middle-right, middle-right, lower-right, and bottom.

Step 3

  • With the plastic opening tool the spudger, gently pry off the inner back.
  • Be careful not to pry it off too hard, as it is just a plastic covering.

With the plastic opening tool the spudger, gently pry off the inner back.

Be careful not to pry it off too hard, as it is just a plastic covering.

Step 4

  • Remove the one 2.381mm Phillips head screw from the motherboard located in the upper-middle part of the phone next to the bottom left corner of the back camera.

Remove the one 2.381mm Phillips head screw from the motherboard located in the upper-middle part of the phone next to the bottom left corner of the back camera.

Step 5

  • Using the spudger, gently pry up all ZIF connectors
  • ZIF connectors have a tiny tab that needs to be flipped up in order to safely remove the cable
  • Using same spudger, gently pry up the orange flat top connector

Using the spudger, gently pry up all ZIF connectors

ZIF connectors have a tiny tab that needs to be flipped up in order to safely remove the cable

Using same spudger, gently pry up the orange flat top connector

Step 6

  • Carefully take off motherboard.

Carefully take off motherboard.

Step 7

              Earpiece Speaker
  • The earpiece speaker is located at the top-middle of the phone.
  • Using the plastic opening tool, carefully press into side of earpiece speaker and push up.
  • You will then be able to grab the speaker with your figers and remove it.

The earpiece speaker is located at the top-middle of the phone.

Using the plastic opening tool, carefully press into side of earpiece speaker and push up.

You will then be able to grab the speaker with your figers and remove it.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors 


                    Garrett Barry

Member since: 03/04/2016

722 Reputation

                                      5 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       UMass Dartmouth, Team 6-3, Bhusal Spring 2016                        

                                                  Member of UMass Dartmouth, Team 6-3, Bhusal Spring 2016 



                    UMASSD-BHUSAL-S16S6G3                     


                                            3 Members                     


                                            10 Guides authored