Difficulty

Moderate

Steps

8

Time Required

                          8 minutes

Sections

2

  • Battery
  • 2 steps
  • Motherboard
  • 6 steps

Flags

0

  • BackZTE Quest n817

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Ensure that the phone is turned off before starting.
  • Orient the device so that the inset on the right side of the device is facing you.
  • Insert the spudger into the inset and carefully remove the back panel.

Ensure that the phone is turned off before starting.

Orient the device so that the inset on the right side of the device is facing you.

Insert the spudger into the inset and carefully remove the back panel.

1024

Step 2

  • Use the ribbon to remove the exposed battery.

Use the ribbon to remove the exposed battery.

Step 3

              Motherboard
  • Use the JIS #000 screwdriver to remove the six 3.0mm screws placed in the back of the ZTE Quest.

Use the JIS #000 screwdriver to remove the six 3.0mm screws placed in the back of the ZTE Quest.

Step 4

  • Carefully pry open the back panel with the plastic opening tool.

Carefully pry open the back panel with the plastic opening tool.

Step 5

  • Use a pair of tweezers to gently disconnect the ribbon cable connector from its socket.

Use a pair of tweezers to gently disconnect the ribbon cable connector from its socket.

Step 6

  • Pull back the tape encasing the brown ribbon cable connector.
  • Remove the ribbon cable from its socket.

Pull back the tape encasing the brown ribbon cable connector.

Remove the ribbon cable from its socket.

Step 7

  • Unplug the flat-top connector by using a pair of tweezers to pry up each side before removing the connector from its socket.

Unplug the flat-top connector by using a pair of tweezers to pry up each side before removing the connector from its socket.

Step 8

  • Disconnect the coaxial connector in the bottom right corner of the motherboard.

Disconnect the coaxial connector in the bottom right corner of the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Eric Loureiro

Member since: 10/26/2018

582 Reputation

                                      5 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       UMass Dartmouth, Team S3-G6, Peak Fall 2018                        

                                                  Member of UMass Dartmouth, Team S3-G6, Peak Fall 2018 



                    UMASSD-PEAK-F18S3G6                     


                                            3 Members                     


                                            10 Guides authored