Zte Maven Loud Speaker Replacement Repair Guide

Difficulty

Easy

Steps

5

Time Required

                          5 minutes            

Sections

4

• Back Cover
• 1 step
• SIM Card
• 1 step
• Midframe
• 2 steps
• Loud Speaker
• 1 step

Flags

0

• BackZTE Maven

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

The loudspeaker is a small sound driver used to transmit audio to the speakers, earpiece, and external devices, such as headphones. A faulty or blown loudspeaker will transmit distorted audio or no audio at all.

Before using this guide, check the headphone port and earpiece speaker for any debris that may be interfering with the sound quality. Typically, a small accumulation of dust can be removed using a small dust blower. If the audio is only distorted through the headphones, be sure to also test various sets of headphones or auxiliary cords with your device to confirm that the faulty part is the ZTE Maven loudspeaker.

Step 2 requires you to remove eight 2mm OEM screws from the device to get to the loudspeaker on the back of the second covering. Be sure to turn off the phone and disconnect from any external power sources before removing or replacing any parts of the phone.

What you need

Step 1

              Back Cover               

• Use your fingers to remove the back cover.

Use your fingers to remove the back cover.

1024

Step 2

              SIM Card               

• Remove the SIM card from the right side of the device using a pair of tweezers.

Remove the SIM card from the right side of the device using a pair of tweezers.

Step 3

              Midframe               

• Remove the seven 2mm Phillips #00 screws from the midframe of the device.

Remove the seven 2mm Phillips #00 screws from the midframe of the device.

Step 4

• Use an opening tool or fingers to separate the midframe covering the rest of the device starting at the top corner.

Use an opening tool or fingers to separate the midframe covering the rest of the device starting at the top corner.

Step 5

              Loud Speaker               

• Remove the loudspeaker from the cover using either your fingers or a spudger.

Remove the loudspeaker from the cover using either your fingers or a spudger.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Karli Kennedy                     

Member since: 10/15/2019

178 Reputation

                                      2 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       Grand Valley State University, Team S1-G4, DeVasto Fall 2019                        

                                                  Member of Grand Valley State University, Team S1-G4, DeVasto Fall 2019 



                    GVSU-DEVASTO-F19S1G4                     


                                            4 Members                     


                                            10 Guides authored