Difficulty
Moderate
Steps
9
Time Required
Suggest a time??
Sections
6
- Back Cover
- 1 step
- Battery
- 1 step
- MicroSD Card
- 1 step
- Midframe
- 2 steps
- Motherboard
- 3 steps
- Daughterboard
- 1 step
Flags
2
Better Introduction
Improve this guide by completing or revising its introduction.
Missing Details
Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.
BackZTE Maven 2
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Back Cover
- Pry off the back cover by inserting an opening tool into the small space on the bottom left between the phone’s cover and body.
- Work your way around the phone with an opening pick to loosen the rest of the back cover.
- Remove the cover.
Pry off the back cover by inserting an opening tool into the small space on the bottom left between the phone’s cover and body.
Work your way around the phone with an opening pick to loosen the rest of the back cover.
Remove the cover.
1024
Step 2
Battery
- Push in and then up on the bottom of the battery to free it from its compartment.
- Pull the battery out.
Push in and then up on the bottom of the battery to free it from its compartment.
Pull the battery out.
Step 3
MicroSD Card
- Using your fingers or blunt tweezers, carefully pull the memory card out of the slot.
- A SIM card is used to demonstrate the process for removing the MicroSD card in these images.
Using your fingers or blunt tweezers, carefully pull the memory card out of the slot.
A SIM card is used to demonstrate the process for removing the MicroSD card in these images.
Step 4
Midframe
- Remove the twelve 3 mm screws with a Phillips #00 screwdriver.
Remove the twelve 3 mm screws with a Phillips #00 screwdriver.
Step 5
- Wedge the opening tool between the front and side panel to create a gap.
- Slide the opening pick around the device to detach the midframe.
Wedge the opening tool between the front and side panel to create a gap.
Slide the opening pick around the device to detach the midframe.
Step 6
Motherboard
- Peel the sticker off the battery compartment, as some of the motherboard components are hidden under it.
- Remove the six 3 mm screws with a Phillips #00 screwdriver.
- Using a pair of blunt tweezers, carefully remove the black wire that’s attached to the gold plates on the left side of the device.
Peel the sticker off the battery compartment, as some of the motherboard components are hidden under it.
Remove the six 3 mm screws with a Phillips #00 screwdriver.
Using a pair of blunt tweezers, carefully remove the black wire that’s attached to the gold plates on the left side of the device.
Step 7
- Using the opening tool, carefully detach the ribbon cables connected to the motherboard.
Using the opening tool, carefully detach the ribbon cables connected to the motherboard.
Step 8
- Work the opening pick around the edges of the motherboard to loosen it up.
- The motherboard is glued down with adhesive. Pushing firmly with the pick will help to loosen the components and remove them.
- Pull the motherboard out of the device.
Work the opening pick around the edges of the motherboard to loosen it up.
The motherboard is glued down with adhesive. Pushing firmly with the pick will help to loosen the components and remove them.
Pull the motherboard out of the device.
Step 9
Daughterboard
- Remove the daughterboard containing the charging port.
Remove the daughterboard containing the charging port.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
Kristen Gismondi
Member since: 11/12/2014
69,397 Reputation
176 Guides authored
Badges:
44
+41 more badges
Team
iFixit
Member of iFixit
Community
141 Members
15,772 Guides authored
