Zte Lever Loud Speaker Replacement Repair Guide

Difficulty

Very difficult

Steps

21

Time Required

                          40 minutes            

Sections

5

• Battery
• 5 steps
• Volume Buttons
• 4 steps
• Power Button
• 2 steps
• Motherboard
• 9 steps
• Loud Speaker
• 1 step

Flags

2

Scenic Route

This guide’s procedure isn’t the most efficient way to get the job done, but still may be useful in some circumstances.

Better Introduction

Improve this guide by completing or revising its introduction.

• BackZTE Lever

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Remove the SD card and the Sim card from the device.
• The Sim and SD cards are not shown here as our device did not come with them.

Remove the SD card and the Sim card from the device.

The Sim and SD cards are not shown here as our device did not come with them.

1024

Step 2

• Use an iFixit opening tool to separate the back from the device.

Use an iFixit opening tool to separate the back from the device.

Step 3

• Remove the two 1.6mm Phillips #0 screws from the battery plug cover.
• Remove the cover.

Remove the two 1.6mm Phillips #0 screws from the battery plug cover.

Remove the cover.

Step 4

• Disconnect the battery cable from the motherboard with a plastic opening tool.

Disconnect the battery cable from the motherboard with a plastic opening tool.

Step 5

• Use your hands, or a plastic opening tool, to pry the battery from the phone.

Use your hands, or a plastic opening tool, to pry the battery from the phone.

Step 6

              Volume Buttons               

• Remove the three 1.6mm Phillips #0 screws from the plastic cover on the motherboard.

Remove the three 1.6mm Phillips #0 screws from the plastic cover on the motherboard.

Step 7

• Remove the top plastic motherboard cover using a plastic opening tool.

Remove the top plastic motherboard cover using a plastic opening tool.

Step 8

• Use a plastic opening tool to flip up the retaining flap on the volume ribbon cable ZIF socket.

Use a plastic opening tool to flip up the retaining flap on the volume ribbon cable ZIF socket.

Step 9

• Peel up the volume button cable from the phone with hands, or plastic opening tool.

Peel up the volume button cable from the phone with hands, or plastic opening tool.

Step 10

              Power Button               

• Disconnect the power button from the motherboard with a plastic opening tool.

Disconnect the power button from the motherboard with a plastic opening tool.

Step 11

• Peel the power button cable up from the phone with you hands, or a plastic opening tool.

Peel the power button cable up from the phone with you hands, or a plastic opening tool.

Step 12

              Motherboard               

• Remove the seven 1.6mm Phillips #0 screws from the plastic cover on the bottom of the motherboard.

Remove the seven 1.6mm Phillips #0 screws from the plastic cover on the bottom of the motherboard.

Step 13

• Remove the bottom plastic motherboard cover with your fingers

Remove the bottom plastic motherboard cover with your fingers

Step 14

• Disconnect the camera from the motherboard with a plastic opening tool.

Disconnect the camera from the motherboard with a plastic opening tool.

Step 15

• Disconnect the display cable from the motherboard with a plastic opening tool.

Disconnect the display cable from the motherboard with a plastic opening tool.

Step 16

Step 17

• Disconnect the rear speaker cable from the motherboard with a plastic opening tool.

Disconnect the rear speaker cable from the motherboard with a plastic opening tool.

Step 18

• Pry the motherboard cell battery from its position on the case of the phone

Pry the motherboard cell battery from its position on the case of the phone

Step 19

• Using the plastic opening tool, pry the motherboard up, sliding along the edge to separate the pieces.

Using the plastic opening tool, pry the motherboard up, sliding along the edge to separate the pieces.

Step 20

• Remove the motherboard with your fingers.

Remove the motherboard with your fingers.

Step 21

              Loud Speaker               

• Using the plastic opening tool, remove the speaker.

Using the plastic opening tool, remove the speaker.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Luke Kilbourne                     

Member since: 01/29/2018

294 Reputation

                                      2 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       USF Tampa, Team S5-G2, Passmore Spring 2018                        

                                                  Member of USF Tampa, Team S5-G2, Passmore Spring 2018 



                    USFT-PASSMORE-S18S5G2                     


                                            3 Members                     


                                            12 Guides authored