Difficulty

Moderate

Steps

7

Time Required

                          15 - 20 minutes

Sections

2

  • Battery
  • 5 steps
  • Front Camera
  • 2 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackZTE Lever

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Remove the SD card and the Sim card from the device.
  • The Sim and SD cards are not shown here as our device did not come with them.

Remove the SD card and the Sim card from the device.

The Sim and SD cards are not shown here as our device did not come with them.

1024

Step 2

  • Use an iFixit opening tool to separate the back from the device.

Use an iFixit opening tool to separate the back from the device.

Step 3

  • Remove the two 1.6mm Phillips #0 screws from the battery plug cover.
  • Remove the cover.

Remove the two 1.6mm Phillips #0 screws from the battery plug cover.

Remove the cover.

Step 4

  • Disconnect the battery cable from the motherboard with a plastic opening tool.

Disconnect the battery cable from the motherboard with a plastic opening tool.

Step 5

  • Use your hands, or a plastic opening tool, to pry the battery from the phone.

Use your hands, or a plastic opening tool, to pry the battery from the phone.

Step 6

              Front Camera
  • Unscrew the three 1.6mm Philllips #0 screws on the plastic cover that are near the top edge of the phone by the camera.
  • Pry off the plastic cover using the iFixit opening tool.

Unscrew the three 1.6mm Philllips #0 screws on the plastic cover that are near the top edge of the phone by the camera.

Pry off the plastic cover using the iFixit opening tool.

Step 7

  • Unplug the front-facing camera press fit connector cable using the iFixit opening tool.
  • Remove the camera from the motherboard.

Unplug the front-facing camera press fit connector cable using the iFixit opening tool.

Remove the camera from the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 


                    Eric Lilling

Member since: 10/03/2019

169 Reputation

                                      2 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       The Citadel Military College of South Carolina, Team S1-G21, Eggleston Fall 2019                        

                                                  Member of The Citadel Military College of South Carolina, Team S1-G21, Eggleston Fall 2019 



                    CMCSC-EGGLESTON-F19S1G21                     


                                            3 Members                     


                                            6 Guides authored