Zte Grand X Max Plus Camera Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          25 minutes

Sections

Back Cover
3 steps
Rear Camera
4 steps

Flags

BackZTE Grand X Max Plus
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

If your camera is scratched or not working, you can follow these steps to replace it.

What you need

Step 1

              Back Cover

Make sure you turn off your phone before starting.
Heat the phone using a heating pad, heat gun, or hair dryer to loosen the glue. You just need to heat the back of the phone.
You can also use a hair dryer or a heating gun for this step.

Make sure you turn off your phone before starting.

Heat the phone using a heating pad, heat gun, or hair dryer to loosen the glue. You just need to heat the back of the phone.

You can also use a hair dryer or a heating gun for this step.

1024

Step 2

After the phone is heated, use the blue plastic opening tool on both sides of the phone.
Don’t apply too much pressure because the cover can crack easily.
To avoid that your cover cracks, you can add tape to back cover.
You can use a suction cup to help remove the battery.

After the phone is heated, use the blue plastic opening tool on both sides of the phone.

Don’t apply too much pressure because the cover can crack easily.

To avoid that your cover cracks, you can add tape to back cover.

You can use a suction cup to help remove the battery.

Step 3

Carefully remove the cover from the phone.

Carefully remove the cover from the phone.

Step 4

              Rear Camera

Remove the screws from the upper part of the phone using a screwdriver with a JIS #000 head. There are (6) six screws that should be removed.

Remove the screws from the upper part of the phone using a screwdriver with a JIS #000 head. There are (6) six screws that should be removed.

Step 5

Use a plastic opening tool to remove the plastic piece that is protecting the motherboard.

Use a plastic opening tool to remove the plastic piece that is protecting the motherboard.

Step 6

With a plastic opening tool, unclip the camera from the motherboard.

With a plastic opening tool, unclip the camera from the motherboard.

Step 7

After the camera is unclipped, remove it from the device.

After the camera is unclipped, remove it from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors

                    Jordano Baer

Member since: 10/02/2017

689 Reputation

                                      5 Guides authored                  



                       Badges:
                       15







                                                        +12 more badges

Team

                       USF Tampa, Team S9-G4, Remmell Fall 2017                        

                                                  Member of USF Tampa, Team S9-G4, Remmell Fall 2017 



                    USFT-REMMELL-F17S9G4                     


                                            4 Members                     


                                            10 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team