Difficulty
Moderate
Steps
6
Time Required
25 minutes
Sections
2
- Back Cover
- 3 steps
- Battery
- 3 steps
Flags
1
Featured Student Guide
This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.
BackZTE Grand X Max Plus
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
The guide will show you how to remove the back cover of the ZTE Grand X Max Plus and how to remove the battery.
What you need
Step 1
Back Cover
- Make sure you turn off your phone before starting.
- Heat the phone using a heating pad, heat gun, or hair dryer to loosen the glue. You just need to heat the back of the phone.
- You can also use a hair dryer or a heating gun for this step.
Make sure you turn off your phone before starting.
Heat the phone using a heating pad, heat gun, or hair dryer to loosen the glue. You just need to heat the back of the phone.
You can also use a hair dryer or a heating gun for this step.
1024
Step 2
- After the phone is heated, use the blue plastic opening tool on both sides of the phone.
- Don’t apply too much pressure because the cover can crack easily.
- To avoid that your cover cracks, you can add tape to back cover.
- You can use a suction cup to help remove the battery.
After the phone is heated, use the blue plastic opening tool on both sides of the phone.
Don’t apply too much pressure because the cover can crack easily.
To avoid that your cover cracks, you can add tape to back cover.
You can use a suction cup to help remove the battery.
Step 3
- Carefully remove the cover from the phone.
Carefully remove the cover from the phone.
Step 4
Battery
- Use a plastic opening tool to pry the battery off.
- The battery will be held down securely by glue, so it’ll take quite a bit of sliding underneath to separate it from the compartment.
Use a plastic opening tool to pry the battery off.
The battery will be held down securely by glue, so it’ll take quite a bit of sliding underneath to separate it from the compartment.
Step 5
- Pull up the piece that is connected to the motherboard. You can pull it using your nails.
Pull up the piece that is connected to the motherboard. You can pull it using your nails.
Step 6
- Remove the battery.
Remove the battery.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 2 other contributors
Jordano Baer
Member since: 10/02/2017
689 Reputation
5 Guides authored
Badges:
15
+12 more badges
Team
USF Tampa, Team S9-G4, Remmell Fall 2017
Member of USF Tampa, Team S9-G4, Remmell Fall 2017
USFT-REMMELL-F17S9G4
4 Members
10 Guides authored