Difficulty
Moderate
Steps
9
Time Required
1 - 2 hours
Sections
1
- Display
- 9 steps
Flags
4
Grammar Police
Embrace your inner English teacher and help improve this guide’s grammar!
Bullets!
Better coordination with markups and the color/type of bullets will help make this guide more clear!
In Progress
This guide is a work in progress. Reload periodically to see the latest changes!
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackZTE Axon 11
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Step 1
Remove Back Cover
- Remove the Back Cover as you would do with any other Mobile ..
Remove the Back Cover as you would do with any other Mobile ..
1024
Step 2
- Get rid of Glue and plastic foils on top ..
Get rid of Glue and plastic foils on top ..
Step 3
- Unscrew lower cover Part (As far as i remember there have been 7 screws) and lift it up
Unscrew lower cover Part (As far as i remember there have been 7 screws) and lift it up
Step 4
- Under the cover part there is 1 screw left (this a tiny one, not like the other 7 ..)
Under the cover part there is 1 screw left (this a tiny one, not like the other 7 ..)
Step 5
- Then lift this part away as well ..
- Unscrew all screws form the upper cover part near the camera ..
Then lift this part away as well ..
Unscrew all screws form the upper cover part near the camera ..
Step 6
- Remove the battery. This is the hardest part. I tried from right side as seen in the Picture .. There are 2 flat cables on zthis side (connecting the motherboard and the lower electronics, so this might not be the best direction to start (see photos later). Try using fan (i did’nt have one) ..
- The blue plastic shows the tiny screw which you need to unscrew to remove the whole upper plastic thing .. I’m not sure you need to remove that part to change the display ..
Remove the battery. This is the hardest part. I tried from right side as seen in the Picture .. There are 2 flat cables on zthis side (connecting the motherboard and the lower electronics, so this might not be the best direction to start (see photos later). Try using fan (i did’nt have one) ..
The blue plastic shows the tiny screw which you need to unscrew to remove the whole upper plastic thing .. I’m not sure you need to remove that part to change the display ..
Step 7
- This is the accu removed .. You can see that I damaged one of the flat cables (seem to work though) .. You can see where most of the glue has been, so concentrate your work on this area. The right flat cable is the connector to the display (the other two connect Motherboard and sideboard).. unconnect it ..
- You can remove the other flat cables too (but don’t have to ..).
This is the accu removed .. You can see that I damaged one of the flat cables (seem to work though) .. You can see where most of the glue has been, so concentrate your work on this area. The right flat cable is the connector to the display (the other two connect Motherboard and sideboard).. unconnect it ..
You can remove the other flat cables too (but don’t have to ..).
Step 8
- Remove the display form the front side .. Change the display, connect the flat cable as it has been .. Basically your are done now ..
Remove the display form the front side .. Change the display, connect the flat cable as it has been .. Basically your are done now ..
Step 9
- Put everything back again ..
Put everything back again ..
Arbeite die Schritte in umgekehrter Reihenfolge ab, um dein Gerät wieder zusammenzubauen.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Andreas Behal
Member since: 11/02/2021
169 Reputation
1 Guide authored
Badges:
1