Difficulty
Difficult
Steps
13
Time Required
20 - 30 minutes
Sections
2
- Motherboard
- 6 steps
- Screen
- 7 steps
Flags
0
BackZTE Awe
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Detach the mid frame
- Use the Phillips Head 00 screw driver to unscrew the seven 0.1mm screws from the phone’s mid frame.
Use the Phillips Head 00 screw driver to unscrew the seven 0.1mm screws from the phone’s mid frame.
1024
Step 2
Separate the mid frame and the digitizer
- Wedge the flat end of the spudger between the mid frame and the digitizer.
Wedge the flat end of the spudger between the mid frame and the digitizer.
Step 3
Expose the motherboard
- Gently pry the mid frame away from the rest of the phone to expose the motherboard.
Gently pry the mid frame away from the rest of the phone to expose the motherboard.
Step 4
Remove the ribbon wires
- Use the tweezers to remove the four ribbon wires on the sides of the device.
Use the tweezers to remove the four ribbon wires on the sides of the device.
Step 5
Orient the motherboard
- Orient the motherboard to expose the mid frame.
Orient the motherboard to expose the mid frame.
Step 6
Remove the connector
- Remove the connector to free the motherboard from the screen.
Remove the connector to free the motherboard from the screen.
Step 7
Remove the cover
- Remove the back cover from the phone.
Remove the back cover from the phone.
Step 8
Remove battery
- Pry the battery up and out of the phone.
Pry the battery up and out of the phone.
Step 9
- Gently wedge the spudger in between the glass screen and the mid frame.
Gently wedge the spudger in between the glass screen and the mid frame.
Step 10
Separate the motherboard from the screen
- Carefully pry the screen away from the motherboard.
Carefully pry the screen away from the motherboard.
Step 11
Remove the ribbons
- Be careful when removing the ribbon wires. They are delicate.
Be careful when removing the ribbon wires. They are delicate.
Step 12
Remove the remaining ribbons
- Remove the remaining two ribbon wires from their connectors.
Remove the remaining two ribbon wires from their connectors.
Step 13
Expose the digitizer
- Wedge the plastic spudger between the screen and the digitizer.
- Gently pry apart the screen from the digitizer.
Wedge the plastic spudger between the screen and the digitizer.
Gently pry apart the screen from the digitizer.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
12 other people completed this guide.
Author
with 4 other contributors
Jennifer DeMeo
Member since: 10/07/2014
1,035 Reputation
5 Guides authored
Badges:
15
+12 more badges
Team
USF Tampa, Team 1-2, Leahy Fall 2014
Member of USF Tampa, Team 1-2, Leahy Fall 2014
USFT-LEAHY-F14S1G2
4 Members
10 Guides authored