Difficulty
Easy
Steps
7
Time Required
15 - 20 minutes
Sections
2
- Battery
- 2 steps
- Camera
- 5 steps
Flags
0
BackZTE Awe
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Remove the back cover
- Remove the back cover of the phone to expose the phone’s mid-frame.
Remove the back cover of the phone to expose the phone’s mid-frame.
1024
Step 2
Remove battery
- Pry the battery up and out of the phone.
Pry the battery up and out of the phone.
Step 3
Remove the battery
- Lift the battery out of the phone.
Lift the battery out of the phone.
Step 4
Unscrew the mid frame
- Use the Phillips Head 00 screw driver to unscrew the seven 0.1mm screws along the perimeter of the phone’s mid frame.
Use the Phillips Head 00 screw driver to unscrew the seven 0.1mm screws along the perimeter of the phone’s mid frame.
Step 5
Separate the mid frame and the digitizer
- Wedge the flat end of the spudger between the mid frame and the digitizer.
Wedge the flat end of the spudger between the mid frame and the digitizer.
Step 6
Expose the motherboard
- Gently pry the mid frame away from the rest of the phone to expose the motherboard.
Gently pry the mid frame away from the rest of the phone to expose the motherboard.
Step 7
Remove the camera
- Use the tweezers to grip the back facing camera. Gently pull until the camera is completely removed from the motherboard.
Use the tweezers to grip the back facing camera. Gently pull until the camera is completely removed from the motherboard.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 5 other contributors
Jennifer DeMeo
Member since: 10/07/2014
1,035 Reputation
5 Guides authored
Badges:
15
+12 more badges
Team
USF Tampa, Team 1-2, Leahy Fall 2014
Member of USF Tampa, Team 1-2, Leahy Fall 2014
USFT-LEAHY-F14S1G2
4 Members
10 Guides authored