Difficulty
Easy
Steps
3
Time Required
5 minutes
Sections
1
- Legs
- 3 steps
Flags
0
BackZoomer Meowzies
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Legs
- Using the Triangle driver remove the four 7.5 mm screws.
- The two front screws are deeper than the two on the back legs which may cause difficulties. These can be reached by putting the bit in first then carefully putting the driver on slightly (not all the way)
Using the Triangle driver remove the four 7.5 mm screws.
The two front screws are deeper than the two on the back legs which may cause difficulties. These can be reached by putting the bit in first then carefully putting the driver on slightly (not all the way)
1024
Step 2
- Turn the device so that the the device is on its side.
- Hold the back and belly on the device and gently pull apart.
- Pulling with too much force might damage a few cables inside, so caution is needed.
Turn the device so that the the device is on its side.
Hold the back and belly on the device and gently pull apart.
Pulling with too much force might damage a few cables inside, so caution is needed.
Step 3
- With insides exposed, grab leg and gently pull up and away from the body to detach them. Repeat for all legs needed.
With insides exposed, grab leg and gently pull up and away from the body to detach them. Repeat for all legs needed.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Muataz Alahmadi
Member since: 02/14/2018
193 Reputation
2 Guides authored
Badges:
3
Team
USF Tampa, Team S6-G2, Eyestone Spring 2018
Member of USF Tampa, Team S6-G2, Eyestone Spring 2018
USFT-EYESTONE-S18S6G2
3 Members
8 Guides authored