Zoll Impact Uni Vent 731 Battery Compartment Replacement Repair Guide

Difficulty

Moderate

Steps

7

Time Required

                          25 minutes            

Sections

1

• Battery Compartment Kit
• 7 steps

Flags

0

• BackZoll Impact Uni-Vent 731

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery Compartment Kit               

• Remove the battery compartment cover by unscrewing the (4) Phillips 6-32 X 5/16 screws. This is indicated in red with the number 1.
• Page 25.

Remove the battery compartment cover by unscrewing the (4) Phillips 6-32 X 5/16 screws. This is indicated in red with the number 1.

Page 25.

1024

Step 2

• Remove the battery by unscrewing the (4)Phillips 6-32 X 2 ¼ screws and detaching the plug from its locking latch. This is indicated in the second picture in blue with the number 2.
• Page 25.

Remove the battery by unscrewing the (4)Phillips 6-32 X 2 ¼ screws and detaching the plug from its locking latch. This is indicated in the second picture in blue with the number 2.

Step 3

• Unscrew the (4) 6-32 X 5/16 Phillips screws to remove the damaged battery compartment case.
• Page 25.

Unscrew the (4) 6-32 X 5/16 Phillips screws to remove the damaged battery compartment case.

Step 4

• Rotate battery compartment to mate with upper and lower case cutouts and press firmly into place. Secure with (4) Phillips 6-32 X 5/16 screws provided.
• Page 25.

Rotate battery compartment to mate with upper and lower case cutouts and press firmly into place. Secure with (4) Phillips 6-32 X 5/16 screws provided.

Step 5

• Re-assemble the battery by connecting its cable to the connector (pull on cable to insure it is locked in place) then tightening the (4) Phillips 6-32 X 2 ¼ screws. This is indicated in blue with the number 5.
• Page 25.

Re-assemble the battery by connecting its cable to the connector (pull on cable to insure it is locked in place) then tightening the (4) Phillips 6-32 X 2 ¼ screws. This is indicated in blue with the number 5.

Step 6

• Re-assemble the battery compartment cover by tightening the (4) 6-32 X5/16 screws. This is indicated in red with the number 6.
• Page 25.

Re-assemble the battery compartment cover by tightening the (4) 6-32 X5/16 screws. This is indicated in red with the number 6.

Step 7

• Perform HiPot Testing then perform Functional Test using the RCS to verify the replacement is working properly.
• Page 25.

Perform HiPot Testing then perform Functional Test using the RCS to verify the replacement is working properly.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Michaela Fromm                     

Member since: 05/04/2020

150 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       Cal Poly, Team S1-G5, Zimmerman Spring 2020                        

                                                  Member of Cal Poly, Team S1-G5, Zimmerman Spring 2020 



                    CPSU-ZIMMERMAN-S20S1G5                     


                                            5 Members                     


                                            5 Guides authored