Zenbre Soundbank Z3 Speaker Replacement Repair Guide

Difficulty

Moderate

Steps

7

Time Required

                          30 minutes            

Sections

3

• Bottom Cover
• 3 steps
• Motherboard Cover
• 1 step
• Speakers
• 3 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

• BackZenbre SoundBank Z3

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Bottom Cover               

• Power off the SoundBank Z3.
• Turn over the device.
• Peel the silicone feet up to remove.
• No extra adhesive is needed to reapply the feet as long as the sticky side is not touched.

Power off the SoundBank Z3.

Turn over the device.

Peel the silicone feet up to remove.

No extra adhesive is needed to reapply the feet as long as the sticky side is not touched.

1024

Step 2

• Remove all eight of the 11 mm Phillips screws from the bottom of the device.

Remove all eight of the 11 mm Phillips screws from the bottom of the device.

Step 3

• Remove the bottom panel speaker using an iFixit opening tool.

Remove the bottom panel speaker using an iFixit opening tool.

Step 4

              Motherboard Cover               

• Remove the four 4.5 mm silver Phillips screws that secure the plastic panel covering the motherboard.
• Remove the plastic panel.

Remove the four 4.5 mm silver Phillips screws that secure the plastic panel covering the motherboard.

Remove the plastic panel.

Step 5

              Speakers               

• Remove the three screws that are holding the speaker down.
• Be careful not to rip out the speaker while taking out the screws.

Remove the three screws that are holding the speaker down.

Be careful not to rip out the speaker while taking out the screws.

Step 6

• Desolder the speaker joints from the motherboard. Follow this How To Solder guide for help with desoldering.

Desolder the speaker joints from the motherboard. Follow this How To Solder guide for help with desoldering.

Step 7

• Remove the speaker from the motherboard.
• Remove the speaker ring.
• Be careful not to remove other components in the speaker.
• Repeat Steps 5-7 with the other speaker.

Remove the speaker from the motherboard.

Remove the speaker ring.

Be careful not to remove other components in the speaker.

Repeat Steps 5-7 with the other speaker.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 5 other contributors 

                    Cherian Thomas                     

Member since: 03/25/2016

334 Reputation

                                      5 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       UMass Dartmouth, Team 3-2, Bhusal Spring 2016                        

                                                  Member of UMass Dartmouth, Team 3-2, Bhusal Spring 2016 



                    UMASSD-BHUSAL-S16S3G2                     


                                            5 Members                     


                                            8 Guides authored