Difficulty
Moderate
Steps
8
Time Required
Suggest a time??
Sections
3
- Bottom Cover
- 3 steps
- Motherboard Cover
- 1 step
- Speaker Grill
- 4 steps
Flags
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Better Introduction
Improve this guide by completing or revising its introduction.
Missing Details
Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.
BackZenbre SoundBank Z3
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Bottom Cover
- Power off the SoundBank Z3.
- Turn over the device.
- Peel the silicone feet up to remove.
- No extra adhesive is needed to reapply the feet as long as the sticky side is not touched.
Power off the SoundBank Z3.
Turn over the device.
Peel the silicone feet up to remove.
No extra adhesive is needed to reapply the feet as long as the sticky side is not touched.
1024
Step 2
- Remove all eight of the 11 mm Phillips screws from the bottom of the device.
Remove all eight of the 11 mm Phillips screws from the bottom of the device.
Step 3
- Remove the bottom panel speaker using an iFixit opening tool.
Remove the bottom panel speaker using an iFixit opening tool.
Step 4
Motherboard Cover
- Remove the four 4.5 mm silver Phillips screws that secure the plastic panel covering the motherboard.
- Remove the plastic panel.
Remove the four 4.5 mm silver Phillips screws that secure the plastic panel covering the motherboard.
Remove the plastic panel.
Step 5
Speaker Grill
- Remove the three silver Phillips screws from the plastic ring that holds the speaker in place.
- Be careful not to rip out the speaker while taking out the screws
- The same steps can be done on the other side of the speaker
Remove the three silver Phillips screws from the plastic ring that holds the speaker in place.
Be careful not to rip out the speaker while taking out the screws
The same steps can be done on the other side of the speaker
Step 6
- First, remove the speaker from the motherboard, then remove the ring that held the speaker in place.
- These are the joints that need to be soldered. Follow this guide link to help you remove the wires from the motherboard.
- How To Solder and Desolder Connections
First, remove the speaker from the motherboard, then remove the ring that held the speaker in place.
These are the joints that need to be soldered. Follow this guide link to help you remove the wires from the motherboard.
How To Solder and Desolder Connections
Step 7
- With the plastic ring removed, the speaker should slide out easily.
- Be careful not remove other components in the speaker
- This will expose the speaker grill
With the plastic ring removed, the speaker should slide out easily.
Be careful not remove other components in the speaker
This will expose the speaker grill
Step 8
- Now that the speaker has been removed, the plastic grill should be visible.
- With a little bit of force they can be pushed out.
Now that the speaker has been removed, the plastic grill should be visible.
With a little bit of force they can be pushed out.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 5 other contributors
Luc Josue Pierre Louis
Member since: 03/09/2016
183 Reputation
1 Guide authored
Badges:
6
+3 more badges
Team
UMass Dartmouth, Team 3-2, Bhusal Spring 2016
Member of UMass Dartmouth, Team 3-2, Bhusal Spring 2016
UMASSD-BHUSAL-S16S3G2
5 Members
8 Guides authored
