Difficulty
Moderate
Steps
3
Time Required
10 - 15 minutes
Sections
1
- Rear Case
- 3 steps
Flags
0
BackZeki TBQG884B
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Rear Case
- Remove the two screws from the end of the device where the ports are located using a Phillips #1 screwdriver.
Remove the two screws from the end of the device where the ports are located using a Phillips #1 screwdriver.
1024
Step 2
- Place the tablet down so that the screen is facing away from you.
- Insert the tip of your opening tool into the small gap between the gray and white plastic covering. Pry it open and you should hear the clips opening up.
- Gently work your way around the perimeter of the tablet’s edge.
Place the tablet down so that the screen is facing away from you.
Insert the tip of your opening tool into the small gap between the gray and white plastic covering. Pry it open and you should hear the clips opening up.
Gently work your way around the perimeter of the tablet’s edge.
Step 3
- Remove the back cover
- Remove any tape on the speaker and detach the speaker from the back plate.
- The speaker is connected to the motherboard by two soldered wires. Don’t break them when you remove the speaker.
Remove the back cover
Remove any tape on the speaker and detach the speaker from the back plate.
The speaker is connected to the motherboard by two soldered wires. Don’t break them when you remove the speaker.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 13 other contributors
David Wyman
Member since: 09/16/2015
343 Reputation
3 Guides authored
Badges:
13
+10 more badges
Team
IUPUI, Team 1-3, Harley Fall 2015
Member of IUPUI, Team 1-3, Harley Fall 2015
IUPUI-HARLEY-F15S1G3
5 Members
5 Guides authored