Difficulty

Moderate

Steps

8

Time Required

                          40 minutes

Sections

2

  • Back Casing
  • 5 steps
  • Reflective Screen
  • 3 steps

Flags

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Step Trimmer

This guide has unnecessary steps. Trim them to be more concise!

  • BackZeki Droid Tablet

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Casing
  • Remove the back casing by slowly popping each tab out with a plastic opening tool.

Remove the back casing by slowly popping each tab out with a plastic opening tool.

1024

Step 2

  • Remove the tapes one by one from the connecting wires with tweezers.

Remove the tapes one by one from the connecting wires with tweezers.

Step 3

  • Remove the black clips from both sides of the casing with a plastic opening tool.
  • The clips should pop off separate from the speakers.

Remove the black clips from both sides of the casing with a plastic opening tool.

The clips should pop off separate from the speakers.

Step 4

  • Remove the speakers from the back casing.
  • Do not tug on the speakers because they are connected to fragile wires.

Remove the speakers from the back casing.

Do not tug on the speakers because they are connected to fragile wires.

Step 5

  • Pull the speakers away from the back casing carefullly.

Pull the speakers away from the back casing carefullly.

Step 6

              Reflective Screen
  • Use a Phillips #000 screwdriver to remove the three screws from the motherboard.
  • Make sure to keep track of the screws. They are needed to reattach the motherboard at the end.

Use a Phillips #000 screwdriver to remove the three screws from the motherboard.

Make sure to keep track of the screws. They are needed to reattach the motherboard at the end.

Step 7

  • Use the plastic opening tool to pull the metal and plastic plates away from the interior of the tablet. Slowly pop each tab off until the plates are mostly separated from the base.

Use the plastic opening tool to pull the metal and plastic plates away from the interior of the tablet. Slowly pop each tab off until the plates are mostly separated from the base.

Step 8

  • Separate the white plastic plate from the metal plate by using the plastic opening tool.
  • While these layers are separated, use your tweezers to gently pull the reflective sheet out from in between them.

Separate the white plastic plate from the metal plate by using the plastic opening tool.

While these layers are separated, use your tweezers to gently pull the reflective sheet out from in between them.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors 


                    Colleen McFadden

Member since: 03/11/2015

268 Reputation

                                      2 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Colorado Springs, Team 2-6, Panko Spring 2015                        

                                                  Member of Colorado Springs, Team 2-6, Panko Spring 2015 



                    UCCS-PANKO-S15S2G6                     


                                            3 Members                     


                                            10 Guides authored