Difficulty

Moderate

Steps

9

Time Required

                          1 - 2 hours

Sections

2

  • Back Casing
  • 5 steps
  • Front Screen
  • 4 steps

Flags

3

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Step Trimmer

This guide has unnecessary steps. Trim them to be more concise!

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

  • BackZeki Droid Tablet

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Follow these instructions to disassemble the Zeki Droid and gain access to the broken screen. To prevent injury, I recommend following this guide to reinforce the broken glass.

What you need

Step 1

              Back Casing
  • Remove the back casing by slowly popping each tab out with a plastic opening tool.

Remove the back casing by slowly popping each tab out with a plastic opening tool.

1024

Step 2

  • Remove the tapes one by one from the connecting wires with tweezers.

Remove the tapes one by one from the connecting wires with tweezers.

Step 3

  • Remove the black clips from both sides of the casing with a plastic opening tool.
  • The clips should pop off separate from the speakers.

Remove the black clips from both sides of the casing with a plastic opening tool.

The clips should pop off separate from the speakers.

Step 4

  • Remove the speakers from the back casing.
  • Do not tug on the speakers because they are connected to fragile wires.

Remove the speakers from the back casing.

Do not tug on the speakers because they are connected to fragile wires.

Step 5

  • Pull the speakers away from the back casing carefullly.

Pull the speakers away from the back casing carefullly.

Step 6

              Front Screen
  • Detach the motherboard from the framing by removing the four screws using a Phillips #000 screwdriver.

Detach the motherboard from the framing by removing the four screws using a Phillips #000 screwdriver.

Step 7

  • Lift the camera and flash components from their fittings using tweezers.

Lift the camera and flash components from their fittings using tweezers.

Step 8

  • Lift the metal framing to reach the components at the front of the device.
  • Do not pull the framing completely off. There is a ZIF connecter holding it in place.

Lift the metal framing to reach the components at the front of the device.

Do not pull the framing completely off. There is a ZIF connecter holding it in place.

Step 9

  • Push the screen forward to remove.

Push the screen forward to remove.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 6 other contributors 


                    Kyla

Member since: 03/11/2015

156 Reputation

                                      2 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       Colorado Springs, Team 2-6, Panko Spring 2015                        

                                                  Member of Colorado Springs, Team 2-6, Panko Spring 2015 



                    UCCS-PANKO-S15S2G6                     


                                            3 Members                     


                                            10 Guides authored