Difficulty

Easy

Steps

8

Time Required

                          15 - 20 minutes

Sections

2

  • Back Casing
  • 5 steps
  • Camera
  • 3 steps

Flags

3

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Step Trimmer

This guide has unnecessary steps. Trim them to be more concise!

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackZeki Droid Tablet

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Casing
  • Remove the back casing by slowly popping each tab out with a plastic opening tool.

Remove the back casing by slowly popping each tab out with a plastic opening tool.

1024

Step 2

  • Remove the tapes one by one from the connecting wires with tweezers.

Remove the tapes one by one from the connecting wires with tweezers.

Step 3

  • Remove the black clips from both sides of the casing with a plastic opening tool.
  • The clips should pop off separate from the speakers.

Remove the black clips from both sides of the casing with a plastic opening tool.

The clips should pop off separate from the speakers.

Step 4

  • Remove the speakers from the back casing.
  • Do not tug on the speakers because they are connected to fragile wires.

Remove the speakers from the back casing.

Do not tug on the speakers because they are connected to fragile wires.

Step 5

  • Pull the speakers away from the back casing carefullly.

Pull the speakers away from the back casing carefullly.

Step 6

              Camera
  • Grip the camera on both sides using tweezers or your fingers, and carefully lift it off the board.
  • The adhesive may make it difficult to remove the cameras from the tablet.

Grip the camera on both sides using tweezers or your fingers, and carefully lift it off the board.

The adhesive may make it difficult to remove the cameras from the tablet.

Step 7

  • Undo the ZIF connector that is connecting the cameras to the motherboard using a plastic spudger or fingernail.
  • This guide has more information on how to undo the ZIF connector
  • Do not yank the ZIF connector. It should come apart very easily with little force needed.

Undo the ZIF connector that is connecting the cameras to the motherboard using a plastic spudger or fingernail.

This guide has more information on how to undo the ZIF connector

Do not yank the ZIF connector. It should come apart very easily with little force needed.

Step 8

  • Pull the copper connection carefully away from the motherboard of the tablet to completely remove the camera.

Pull the copper connection carefully away from the motherboard of the tablet to completely remove the camera.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 5 other contributors 


                    Colleen McFadden

Member since: 03/11/2015

268 Reputation

                                      2 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Colorado Springs, Team 2-6, Panko Spring 2015                        

                                                  Member of Colorado Springs, Team 2-6, Panko Spring 2015 



                    UCCS-PANKO-S15S2G6                     


                                            3 Members                     


                                            10 Guides authored