Difficulty
Difficult
Steps
6
Time Required
30 - 45 minutes
Sections
1
- LED Screen
- 6 steps
Flags
0
BackZeepad 7DRK
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
LED Screen
- First, pry off the outer yellow casing using the blue plastic prying tool provided in the kit.
- Wedge the flat edge of the pry tool in the slit and use leverage to push the casing upwards and pop it off in multiple places across the top and side of the device.
- This should reveal the inner workings of the tablet, be careful as the volume and power buttons may fall out in the process. The speaker will also still be attached to the case by wires as shown.
First, pry off the outer yellow casing using the blue plastic prying tool provided in the kit.
Wedge the flat edge of the pry tool in the slit and use leverage to push the casing upwards and pop it off in multiple places across the top and side of the device.
This should reveal the inner workings of the tablet, be careful as the volume and power buttons may fall out in the process. The speaker will also still be attached to the case by wires as shown.
1024
Step 2
- Once the casing is off, carefully pull the speaker out of its plastic holding slot, be careful not to separate the connections to the wires.
Once the casing is off, carefully pull the speaker out of its plastic holding slot, be careful not to separate the connections to the wires.
Step 3
- Next, remove the 4 screws that hold the mother board in place. Allowing the motherboard to wiggle in place.
Next, remove the 4 screws that hold the mother board in place. Allowing the motherboard to wiggle in place.
Step 4
- Now that the motherboard is disconnected, disconnect the longer flat cables by pushing the locks open and taking the cable out.
Now that the motherboard is disconnected, disconnect the longer flat cables by pushing the locks open and taking the cable out.
Step 5
- First, peel the clear yellow tape off to detach the battery from different wires and the metal.
- Next, peel the battery off the double sided tape to remove it from the metal.
- Both the battery and and the motherboard will still be attached to some wires, these wires are soldered connections, do your best to avoid breaking these connections.
First, peel the clear yellow tape off to detach the battery from different wires and the metal.
Next, peel the battery off the double sided tape to remove it from the metal.
Both the battery and and the motherboard will still be attached to some wires, these wires are soldered connections, do your best to avoid breaking these connections.
Step 6
- Use the metal prying tool to remove the metal casing from around the LED screen
- Replace the screen
Use the metal prying tool to remove the metal casing from around the LED screen
Replace the screen
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
William Strickland
Member since: 10/20/2016
143 Reputation
1 Guide authored
Badges:
6
+3 more badges
Team
UMass Dartmouth, Team 6-8, Martin Fall 2016
Member of UMass Dartmouth, Team 6-8, Martin Fall 2016
UMASSD-MARTIN-F16S6G8
3 Members
10 Guides authored
Theresa Phillips - Feb 25, 2018
Reply
Where did you or can I buy the replacement screen. Please email response to PhillipsT052163@gmail.com.
Thank You & God Bless!
Theresa Phillips
steven Neville - Jul 23, 2020
Reply
where and how do i get this replacement screen for the zeepad 7dr-q