Zeepad 7 0 Battery Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          25 - 35 minutes

Sections

Battery
4 steps

Flags

BackZeepad 7.0
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

For your safety, discharge your battery below 25% before disassembling your phone. This reduces the risk of a dangerous thermal event if the battery is accidentally damaged during the repair.

What you need

Step 1

              Battery

Power off the device and keep it unplugged.
Open the case using a plastic opening tool around the edges. Slightly pull the cover.
Do not completely remove back casing because there is a speaker attached to the back.

Power off the device and keep it unplugged.

Open the case using a plastic opening tool around the edges. Slightly pull the cover.

Do not completely remove back casing because there is a speaker attached to the back.

1024

Step 2

Cut the power cables connecting between the screen and the motherboard. There should be a red and black cable each. Try to cut in the center of the two wires to solder after you replace it.
Try to separate the wires away from the other wires on the motherboard. This way you will not cut any additional wiring.

Cut the power cables connecting between the screen and the motherboard. There should be a red and black cable each. Try to cut in the center of the two wires to solder after you replace it.

Try to separate the wires away from the other wires on the motherboard. This way you will not cut any additional wiring.

Step 3

Peel off the battery from the metal casing for the LED screen. The battery will be held down with an adhesive, and it will not take much pressure to be released.
There will be additional wiring hooked up to the motherboard. Make sure not to tangle up or damage any wiring close by.
Do not place much pressure onto the LED screen while peeling off the battery.

Peel off the battery from the metal casing for the LED screen. The battery will be held down with an adhesive, and it will not take much pressure to be released.

There will be additional wiring hooked up to the motherboard. Make sure not to tangle up or damage any wiring close by.

Do not place much pressure onto the LED screen while peeling off the battery.

Step 4

After creating space to work, warm up a soldering iron.
Apply heat onto the solder over the corresponding cut wire to the new battery wire.
Once the solder melts and forms a bridge between the two wires, try to turn on the device then check for power.
How To Solder and Desolder Connections
Keep the soldering iron away from the battery, motherboard, and any other wires. Do not let children around the soldering station.

After creating space to work, warm up a soldering iron.

Apply heat onto the solder over the corresponding cut wire to the new battery wire.

Once the solder melts and forms a bridge between the two wires, try to turn on the device then check for power.

How To Solder and Desolder Connections

Keep the soldering iron away from the battery, motherboard, and any other wires. Do not let children around the soldering station.

To reassemble your device, follow the initial instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors

                    Jacob

Member since: 03/26/2018

139 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       IUPUI, Team S2-G1, Harley Spring 2018                        

                                                  Member of IUPUI, Team S2-G1, Harley Spring 2018 



                    IUPUI-HARLEY-S18S2G1                     


                                            3 Members                     


                                            4 Guides authored

veronica fisher - Jul 25, 2021

Where can I get a replacement battery for my jelly bean zeepad 7.0/4.2 pocket edge?

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team