Zeal Optics Ion Lens Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

Suggest a time??

Sections

Lens
5 steps

Flags

BackZeal Optics iON
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

Step 1

              Lens

In the next few steps, you will be releasing the clips that hold the lens in place. Do not try to completely remove the lens until all the clips have been released.
Hold the iON in your hands with your thumbs on the clips next to the middle of the lens.
Pull the rubber housing apart to release the first two clips.

In the next few steps, you will be releasing the clips that hold the lens in place. Do not try to completely remove the lens until all the clips have been released.

Hold the iON in your hands with your thumbs on the clips next to the middle of the lens.

Pull the rubber housing apart to release the first two clips.

1024

Step 2

Grab the inside of the plastic nose rest with your thumb and index finger.
Rotate the nose rest upwards until you feel that it is free from the lens.

Grab the inside of the plastic nose rest with your thumb and index finger.

Rotate the nose rest upwards until you feel that it is free from the lens.

Step 3

Rotate the device 180 degrees.
Grab the top of the goggle frame that holds the camera assembly.
Rotate the frame outwards until you feel that the clips inside it are free.

Rotate the device 180 degrees.

Grab the top of the goggle frame that holds the camera assembly.

Rotate the frame outwards until you feel that the clips inside it are free.

Step 4

While firmly holding the goggles with the palm of one hand, grab the top right corner of the frame and rotate it away from the lens.

While firmly holding the goggles with the palm of one hand, grab the top right corner of the frame and rotate it away from the lens.

Step 5

The lens should now be barely attached to the frame. If it still feels firmly attached, repeat any necessary steps to free the clips.
While holding the goggles in one hand, use the other to grab the lens from opposite ends, and rotate it out of the housing and away from any remaining clips.

The lens should now be barely attached to the frame. If it still feels firmly attached, repeat any necessary steps to free the clips.

While holding the goggles in one hand, use the other to grab the lens from opposite ends, and rotate it out of the housing and away from any remaining clips.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors

                    Jake Devincenzi

Member since: 04/18/2011

116,089 Reputation

                                      57 Guides authored                  



                       Badges:
                       51







                                                        +48 more badges

Thomas Capellini - Jan 6, 2018

I’m guessing I need a special lens for a replacement could you point me in the direction of new lens for my zeal ions

Introduction#

#

#

#

#

#

#

#

Introduction