Difficulty
Moderate
Steps
2
Time Required
Suggest a time??
Sections
1
- Zanussi Washing Machine Fault Code Reset
- 2 steps
Flags
Needs More Images
A few more images would make this guide’s procedures crystal clear.
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackWashing Machine
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
I cleaned all the pipes, checked motor brushes, oiled and checked motors, no benefit.
I found this worked though, and left it working perfect -
Next time it goes wonky give it a try first!
Seán
Step 1
Zanussi Washing Machine Fault Code Reset
- Turn the dial to off.
- Press and hold together the start button (the one with the green arrow) and the button to the left of it.
- While holding, turn the Programme Dial 1 ‘click’ clockwise(to 90 degrees temp).
- The lights ( or digital screen ) will flash - release the buttons (the lights should scroll).
- Now turn the dial a further 9 clicks clockwise.
- Note the error code displayed.
- Continue turning the dial clockwise till you get to off, then turn to any program and back to off.
Turn the dial to off.
Press and hold together the start button (the one with the green arrow) and the button to the left of it.
While holding, turn the Programme Dial 1 ‘click’ clockwise(to 90 degrees temp).
The lights ( or digital screen ) will flash - release the buttons (the lights should scroll).
Now turn the dial a further 9 clicks clockwise.
Note the error code displayed.
Continue turning the dial clockwise till you get to off, then turn to any program and back to off.
1024
Step 2
- All washing machines will eventually stop working. First try the brushes on the main motor. They wear down, the more work the quicker it will happen. They are usually contained in an external plastic housing, one each at the rear end of the motor and easy to replace.
All washing machines will eventually stop working. First try the brushes on the main motor. They wear down, the more work the quicker it will happen. They are usually contained in an external plastic housing, one each at the rear end of the motor and easy to replace.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
24 other people completed this guide.
Author
with 1 other contributor
keelsean
Member since: 01/03/2015
412 Reputation
1 Guide authored
Badges:
9
+6 more badges
suegoldsmith - Jun 22, 2016
Reply
Fantastic. I had spent a very frustrating hour trying to sort the problem with my machine. Last resort before buying a new one was to trawl the internet. Came across this solution and, bingo, it worked. So pleased and grateful for the info, saved me a bundle!!
Totorean Marcel - Sep 26, 2016
Reply
It shows me E72,what i have to do?
funvic - Jan 7, 2017
Reply
I tried this although in my machine the ’extra rinse’ button is not there but a half load button instead. I never the less used this button & what happened is as described. I only needed to turn the dial 8 turns, 40 degrees light wash & the unit made a few cycles then spun at top speed. So far ok. Unfortunately this seems to have upset the programmer which does not follow it’s normal pattern of events.
Don’t know what to do now except, maybe experiment to get a full wash the go through the procedure again to spin.
Any further help would be appreciated,
Vic Funnell
Jackie Murray Bernardo - Mar 26, 2019
Regarding your programmer not displaying the normal wash cycles did you manage to resolve this.
Julie Acaster - Jul 9, 2017
Reply
This has just worked for me. Thanku very much