Difficulty
Moderate
Steps
2
Time Required
5 - 10 minutes
Sections
1
- Spring Clip
- 2 steps
Flags
0
BackYuneec Typhoon H
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
The spring clips usually get broken during a crash.
What you need
Step 1
Spring Clip
- Using a JIS #00 screwdriver, unscrew the 3mm oval screw.
- The oval screw is hard to remove once fully unscrewed, to remove the screw flip the drone upside down to have the screw fall out.
Using a JIS #00 screwdriver, unscrew the 3mm oval screw.
The oval screw is hard to remove once fully unscrewed, to remove the screw flip the drone upside down to have the screw fall out.
1024
Step 2
- For this step the arm must be bent.
- Remove the broken arm clip by pinching the metal top and then pull it out with an upward force.
- The Blunt Nose Tweezers may be helpful in removing the arm clip.
For this step the arm must be bent.
Remove the broken arm clip by pinching the metal top and then pull it out with an upward force.
The Blunt Nose Tweezers may be helpful in removing the arm clip.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 2 other contributors
Claire Luce
Member since: 04/16/2018
371 Reputation
2 Guides authored
Badges:
9
+6 more badges
Team
Cal Poly, Team S22-G3, Maness Spring 2018
Member of Cal Poly, Team S22-G3, Maness Spring 2018
CPSU-MANESS-S18S22G3
4 Members
5 Guides authored
Ruud - Dec 23, 2018
Reply
what function does the little screw have?
