Difficulty
Easy
Steps
3
Time Required
5 - 10 minutes
Sections
1
- Landing Gear
- 3 steps
Flags
0
BackYuneec Typhoon H
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Landing Gear
- Lift all drone arms up so you can access the landing gear easily.
Lift all drone arms up so you can access the landing gear easily.
1024
Step 2
- Unscrew the 16.9 mm screw at the top of the landing leg with a Phillips #00 screwdriver.
- Make sure the screw head is not stripped in the process.
- If stripped, the whole leg, including the internal sensors, will need to be replaced.
Unscrew the 16.9 mm screw at the top of the landing leg with a Phillips #00 screwdriver.
Make sure the screw head is not stripped in the process.
If stripped, the whole leg, including the internal sensors, will need to be replaced.
Step 3
- Pull the landing leg out slowly and remove it from the device.
Pull the landing leg out slowly and remove it from the device.
Your Yuneec Typhoon H should now be ready to fly safely again.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 4 other contributors
Shasta Banchio
Member since: 04/16/2018
130 Reputation
1 Guide authored
Badges:
6
+3 more badges
Team
Cal Poly, Team S22-G3, Maness Spring 2018
Member of Cal Poly, Team S22-G3, Maness Spring 2018
CPSU-MANESS-S18S22G3
4 Members
5 Guides authored
