Difficulty
Moderate
Steps
10
Time Required
10 minutes
Sections
3
- Battery
- 2 steps
- Backplate
- 5 steps
- Joystick
- 3 steps
Flags
0
BackYuneec ST16S
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Hold down the button located above the battery while applying downward pressure to the battery.
Hold down the button located above the battery while applying downward pressure to the battery.
1024
Step 2
- While still holding down the button, slide the battery out of its slot.
While still holding down the button, slide the battery out of its slot.
Step 3
Backplate
- Remove the single screw from the battery compartment.
Remove the single screw from the battery compartment.
Step 4
- Remove the rubber bumpers from the back of the device using a spudger.
Remove the rubber bumpers from the back of the device using a spudger.
Step 5
- Remove the two screws located under each of the rubber bumpers.
Remove the two screws located under each of the rubber bumpers.
Step 6
- Remove the three screws along the top of the device.
Remove the three screws along the top of the device.
Step 7
- Carefully remove the backplate from the device.
Carefully remove the backplate from the device.
Step 8
Joystick
- Remove the four screws from around the joystick.
Remove the four screws from around the joystick.
Step 9
- Unplug the joystick from the device.
Unplug the joystick from the device.
Step 10
- Remove the joystick from the device.
Remove the joystick from the device.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Christian Resendes
Member since: 10/28/2021
589 Reputation
5 Guides authored
Badges:
5
+2 more badges
Team
UMass Dartmouth, Team 4-2, Gulbrandsen Fall 2021
Member of UMass Dartmouth, Team 4-2, Gulbrandsen Fall 2021
UMASSD-GULBRANDSEN-F21S4G2
3 Members
6 Guides authored
