Difficulty

Moderate

Steps

9

Time Required

                          20 - 30 minutes            

Sections

1

  • Motherboard M7
  • 9 steps

Flags

0

  • BackYuneec Breeze 4K

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Motherboard M7               
  • Before you begin start by putting on a ESD wrist strap to prevent ESD damage and remove the battery.
  • Flip over the drone so that the propellers are facing down and the camera is facing up.

Before you begin start by putting on a ESD wrist strap to prevent ESD damage and remove the battery.

Flip over the drone so that the propellers are facing down and the camera is facing up.

1024

Step 2

  • Grip the cover that covers the rest of the wires, and give it a slight pull to remove it.

Grip the cover that covers the rest of the wires, and give it a slight pull to remove it.

Step 3

  • Remove the 4 rubber plugs that hold the drone and its internal parts together.
  • These plugs can be located in each corner of the drone, and are white.

Remove the 4 rubber plugs that hold the drone and its internal parts together.

These plugs can be located in each corner of the drone, and are white.

Step 4

  • Unplug the four cables that are connected on the top face of the frame.

Unplug the four cables that are connected on the top face of the frame.

Step 5

  • The rest of the wires that are still connected can be unplugged.
  • Using a pair of tweezers they can be unplugged.

The rest of the wires that are still connected can be unplugged.

Using a pair of tweezers they can be unplugged.

Step 6

  • Lift up or tilt entire frame and mother board and unplug all the wires.

Lift up or tilt entire frame and mother board and unplug all the wires.

Step 7

  • The battery connector has two wires connected to a plug in with two little screws.
  • Unscrew the two screws and pull it apart using a small tweezers.

The battery connector has two wires connected to a plug in with two little screws.

Unscrew the two screws and pull it apart using a small tweezers.

Step 8

  • Flip over the frame and mother board and unscrew the mother board.
  • There are four screws on each corner of the mother board.

Flip over the frame and mother board and unscrew the mother board.

There are four screws on each corner of the mother board.

Step 9

  • After the screws are out, the motherboard can be pulled out softly with hands.
  • Remove the motherboard from the device.

After the screws are out, the motherboard can be pulled out softly with hands.

Remove the motherboard from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      5 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    Ryanne Millis                     

Member since: 10/04/2018

318 Reputation

                                      1 Guide authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       UW Stout, Team S6-G5, Ogden Fall 2018                        

                                                  Member of UW Stout, Team S6-G5, Ogden Fall 2018 



                    UWSTOUT-OGDEN-F18S6G5                     


                                            4 Members                     


                                            4 Guides authored                     

paul_courville - Apr 24, 2020

Reply

Excellent step by step instructions.