Difficulty
Moderate
Steps
8
Time Required
10 minutes
Sections
2
- Rear Casing
- 4 steps
- Wiring
- 4 steps
Flags
0
BackYamaha NS-AW190BL
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Rear Casing
- Remove the six Phillips Head 1.2mm screws on the front side of the speaker.
Remove the six Phillips Head 1.2mm screws on the front side of the speaker.
1024
Step 2
- Crack open both parts of the casing carefully.
- Using a plastic opening tool, wedge open the bottom of the speaker to separate the two parts of the speaker.
Crack open both parts of the casing carefully.
Using a plastic opening tool, wedge open the bottom of the speaker to separate the two parts of the speaker.
Step 3
- Remove the cooling foam.
- Use a metal spudger to push the tab in on the red wire.
- Repeat the process for the blue wire.
Remove the cooling foam.
Use a metal spudger to push the tab in on the red wire.
Repeat the process for the blue wire.
Step 4
- The blue wire can now be removed from its connector.
- Remove the red wire to free the rear casing.
The blue wire can now be removed from its connector.
Remove the red wire to free the rear casing.
Step 5
Wiring
- Use the metal spudger to bend down the metal tabs that hold the wires to the terminals. The tabs are small and in between the grooves of the terminal.
Use the metal spudger to bend down the metal tabs that hold the wires to the terminals. The tabs are small and in between the grooves of the terminal.
Step 6
- Remove the wires from the terminals.
Remove the wires from the terminals.
Step 7
- Use the metal spudger to bend the metal tabs that hold the connectors to the terminals.
Use the metal spudger to bend the metal tabs that hold the connectors to the terminals.
Step 8
- Remove the wires from the terminals. Then remove the entire wire assembly.
Remove the wires from the terminals. Then remove the entire wire assembly.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Roshal Robince
Member since: 02/07/2017
101 Reputation
1 Guide authored
Badges:
5
+2 more badges
Team
USF Tampa, Team 17-3, Blackwell Spring 2017
Member of USF Tampa, Team 17-3, Blackwell Spring 2017
USFT-BLACKWELL-S17S17G3
4 Members
5 Guides authored
