Difficulty
Moderate
Steps
11
Time Required
20 minutes
Sections
1
- Motherboard
- 11 steps
Flags
0
BackXiaomi Redmi 2
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Motherboard
- Use the flat end of the spudger to remove the back panel from the mid-frame and front body.
Use the flat end of the spudger to remove the back panel from the mid-frame and front body.
1024
Step 2
- Insert your finger into the curved opening of the mid-frame.
- Lift the battery and remove.
Insert your finger into the curved opening of the mid-frame.
Lift the battery and remove.
Step 3
- Remove the SIM and/or memory cards if present.
- Remove twelve 3.4 mm Phillips #000 screws securing the mid-frame to the front body.
Remove the SIM and/or memory cards if present.
Remove twelve 3.4 mm Phillips #000 screws securing the mid-frame to the front body.
Step 4
- Slide the spudger between the mid-frame and front body, gradually prying the two bodies apart as you slide the spudger around the perimeter of the phone.
Slide the spudger between the mid-frame and front body, gradually prying the two bodies apart as you slide the spudger around the perimeter of the phone.
Step 5
- Remove the 3.4 mm Phillips #000 screw that holds the motherboard to the front body.
- Keep this screw separate from the initial twelve.
Remove the 3.4 mm Phillips #000 screw that holds the motherboard to the front body.
Keep this screw separate from the initial twelve.
Step 6
- Using one prong of the tweezers, pry back the brown clip located on top of the LCD ribbon connector.
Using one prong of the tweezers, pry back the brown clip located on top of the LCD ribbon connector.
Step 7
- Using one prong of the tweezers, pry the ribbon clip away from the motherboard.
Using one prong of the tweezers, pry the ribbon clip away from the motherboard.
Step 8
- Lift and hinge the motherboard with your fingers.
Lift and hinge the motherboard with your fingers.
Step 9
- Using one prong of the tweezers, lift and pry back the metal clip positioned over the front proximity sensor ribbon connector.
Using one prong of the tweezers, lift and pry back the metal clip positioned over the front proximity sensor ribbon connector.
Step 10
- Using the tweezers, pull the antenna connector from the motherboard.
Using the tweezers, pull the antenna connector from the motherboard.
Step 11
- Lift the motherboard out of the front cover and set aside.
Lift the motherboard out of the front cover and set aside.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
45 other people completed this guide.
Author
with 1 other contributor
Alicia Brenner
Member since: 10/01/2015
3,509 Reputation
5 Guides authored
Badges:
14
+11 more badges
Team
USF Tampa, Team 1-3, Leahy Fall 2015
Member of USF Tampa, Team 1-3, Leahy Fall 2015
USFT-LEAHY-F15S1G3
2 Members
5 Guides authored
Ana - Jul 19, 2016
Reply
this is very helpful
asreefbashak - Oct 6, 2016
Reply
hi brother mi phone was water damaged .it was not wrking i mean phone gets on but no display. phone gets ring and i can lift call and speak. when i connect to laptop i can access files in it. its get charging on connecting to charger
can u suggest me wat to do
please
netman91 - May 10, 2017
may be LCD is damage. can fix it at 82877181 contact Peter for checking.
jhon Carter - Feb 8, 2017
Reply
Hi bro I’m having redmi 2 mobile and it has a problem it is not taking any os it’s having a compliant of not receiving os …..
There is any solution for that
Please give me reply bro any suggestions
Jakka Akhilesh - Mar 4, 2017
Reply
Can i know the name of the motherboard used for redmi 2 prime 16GB,please tell me the name bro
