Difficulty

Moderate

Steps

5

Time Required

                          5 - 8 minutes

Sections

2

  • Rear Case Assembly
  • 2 steps
  • Headphone Jack
  • 3 steps

Flags

1

Needs More Images

A few more images would make this guide’s procedures crystal clear.

  • BackXiaomi Mi Pad

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Rear Case Assembly
  • Remove the micro SD card slot from the left side of the device using either the metal pin included with the device or a SIM card eject tool.

Remove the micro SD card slot from the left side of the device using either the metal pin included with the device or a SIM card eject tool.

1024

Step 2

  • Use a plastic opening tool and/or opening pick to gently pry the back panel away from the device. Work your way around the device, slowly increasing the gap.
  • The back panel has small clips and light adhesive that easily releases from the device.

Use a plastic opening tool and/or opening pick to gently pry the back panel away from the device. Work your way around the device, slowly increasing the gap.

The back panel has small clips and light adhesive that easily releases from the device.

Step 3

              Headphone Jack
  • Remove the twelve 3.0 mm Phillips #000 screws on the upper cover of the device.

Remove the twelve 3.0 mm Phillips #000 screws on the upper cover of the device.

Step 4

  • Remove the upper cover from the device.

Remove the upper cover from the device.

Step 5

  • Use a plastic opening tool to pull up and remove the headphone jack from the upper cover.
  • Insert the corner of a plastic opening tool into the port of the headphone jack for easier removal.

Use a plastic opening tool to pull up and remove the headphone jack from the upper cover.

Insert the corner of a plastic opening tool into the port of the headphone jack for easier removal.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 5 other contributors 


                    Rene Mendoza

Member since: 09/03/2015

311 Reputation

                                      2 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       USF Tampa, Team 12-5, Blackwell Fall 2015                        

                                                  Member of USF Tampa, Team 12-5, Blackwell Fall 2015 



                    USFT-BLACKWELL-F15S12G5                     


                                            3 Members                     


                                            12 Guides authored

marcusvoag - Jun 5, 2016

Reply

And where to buy? :-(