Difficulty
Moderate
Steps
7
Time Required
15 - 20 minutes
Sections
2
- Rear Case Assembly
- 2 steps
- Battery
- 5 steps
Flags
1
Needs More Images
A few more images would make this guide’s procedures crystal clear.
BackXiaomi Mi Pad
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Rear Case Assembly
- Remove the micro SD card slot from the left side of the device using either the metal pin included with the device or a SIM card eject tool.
Remove the micro SD card slot from the left side of the device using either the metal pin included with the device or a SIM card eject tool.
1024
Step 2
- Use a plastic opening tool and/or opening pick to gently pry the back panel away from the device. Work your way around the device, slowly increasing the gap.
- The back panel has small clips and light adhesive that easily releases from the device.
Use a plastic opening tool and/or opening pick to gently pry the back panel away from the device. Work your way around the device, slowly increasing the gap.
The back panel has small clips and light adhesive that easily releases from the device.
Step 3
Battery
- Remove the twelve 3.0 mm Phillips #000 screws on the upper cover of the device.
Remove the twelve 3.0 mm Phillips #000 screws on the upper cover of the device.
Step 4
- Remove the upper cover from the device.
Remove the upper cover from the device.
Step 5
- Use a plastic opening tool to disconnect the three ribbon cable connectors.
- If you’re only going to replace the battery, you should only need to disconnect the smallest ribbon cable that connects the battery to the motherboard.
Use a plastic opening tool to disconnect the three ribbon cable connectors.
If you’re only going to replace the battery, you should only need to disconnect the smallest ribbon cable that connects the battery to the motherboard.
Step 6
- Carefully pry around the perimeter of the battery with a plastic opening tool to loosen the adhesive securing the battery to the device.
- Be gentle when removing the battery, as lithium-ion batteries should not be bent or punctured.
Carefully pry around the perimeter of the battery with a plastic opening tool to loosen the adhesive securing the battery to the device.
Be gentle when removing the battery, as lithium-ion batteries should not be bent or punctured.
Step 7
- If you disconnected all three connectors, the charging port ribbon cable may have a small amount of adhesive securing it to the battery. Gently pry the cable free of the battery and lift the battery up and out of the device.
If you disconnected all three connectors, the charging port ribbon cable may have a small amount of adhesive securing it to the battery. Gently pry the cable free of the battery and lift the battery up and out of the device.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
18 other people completed this guide.
Author
with 4 other contributors
Jessica
Member since: 09/03/2015
683 Reputation
1 Guide authored
Badges:
13
+10 more badges
Team
USF Tampa, Team 12-5, Blackwell Fall 2015
Member of USF Tampa, Team 12-5, Blackwell Fall 2015
USFT-BLACKWELL-F15S12G5
3 Members
12 Guides authored
Marcel - Jan 24, 2016
Reply
Hi
Great Tutorial, but where can i buy a replacement Battery?
THANKS
affan - Jun 30, 2016
Go to Leamington road and you will get it
Go to Leamington road mumbai
Dino Bay - Apr 29, 2016
Reply
Where to purchase the Mi Paf battery?
Man Mohan Shukla - Sep 10, 2016
Reply
Please please make a video for it. I need it desperately.
