Difficulty

Moderate

Steps

8

Time Required

                          30 - 35 minutes

Sections

2

  • Battery
  • 4 steps
  • Rear camera
  • 4 steps

Flags

1

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

  • BackXiaomi Mi Note

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Use your suction cup to grip the back of the phone. Once the suction cup is secure, pull back with moderate force and the back plate should snap free.

Use your suction cup to grip the back of the phone. Once the suction cup is secure, pull back with moderate force and the back plate should snap free.

1024

Step 2

  • Once the back plate is off you will need to detach the frames that hold in the battery. Locate and remove the screws (Screws are marked in the image). You can then pull the frame off with ease once the screws have been removed.
  • Remove the six 3.5mm Phillips #000 black screws using a securing part of the back panels.
  • Remove the seven 2.5mm Phillips #000 black screws securing part of the back panels.
  • Remove the five 2mm Phillips #000 silver screws securing the remaining back panels.

Once the back plate is off you will need to detach the frames that hold in the battery. Locate and remove the screws (Screws are marked in the image). You can then pull the frame off with ease once the screws have been removed.

Remove the six 3.5mm Phillips #000 black screws using a securing part of the back panels.

Remove the seven 2.5mm Phillips #000 black screws securing part of the back panels.

Remove the five 2mm Phillips #000 silver screws securing the remaining back panels.

Step 3

  • Use a nylon spudger to pry upwards to detach the ribbon that’s connecting the battery to the motherboard.

Use a nylon spudger to pry upwards to detach the ribbon that’s connecting the battery to the motherboard.

Step 4

  • Insert a nylon or metal spudger underneath the battery at any point. Then slide the spudger around all the edges to loosen it. The battery can now be easily lifted out of the frame.
  • Glue will be holding down the backside of the battery.

Insert a nylon or metal spudger underneath the battery at any point. Then slide the spudger around all the edges to loosen it. The battery can now be easily lifted out of the frame.

Glue will be holding down the backside of the battery.

Step 5

              Rear camera
  • Use a plastic spudger to detach the remaining ribbon from the motherboard.

Use a plastic spudger to detach the remaining ribbon from the motherboard.

Step 6

  • Use tweezers to detach the small ribbon on the left side located near the volume buttons as well as the microphone cord located on the right side along the frame.
  • When detaching the ribbon on the left use minimal force to prevent damage.

Use tweezers to detach the small ribbon on the left side located near the volume buttons as well as the microphone cord located on the right side along the frame.

When detaching the ribbon on the left use minimal force to prevent damage.

Step 7

  • Use a tweezer to lift and remove the motherboard from the frame.
  • Be sure that the Dual SIM card and tray has been removed.

Use a tweezer to lift and remove the motherboard from the frame.

Be sure that the Dual SIM card and tray has been removed.

Step 8

  • Use tweezers to slide the ribbon to the right out of the insert as shown in the image.

Use tweezers to slide the ribbon to the right out of the insert as shown in the image.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.

Author

                                      with 3 other contributors 


                    Abdulaziz Aldekheel

Member since: 09/03/2015

344 Reputation

                                      2 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       USF Tampa, Team 1-6, Sullivan Fall 2015                        

                                                  Member of USF Tampa, Team 1-6, Sullivan Fall 2015 



                    USFT-SULLIVAN-F15S1G6                     


                                            4 Members                     


                                            6 Guides authored

Rick Halder - Jan 6, 2017

Reply

With the onset of the new year, the world of smartphones is looking forward to the launch of Xiaomi Mi6, the next flagship launch in the series of Mi phones.

The Mi 5 received a lot of positive feedback when it launched last year, so we can expect that the Mi6 is going to be even better than its predecessor.

You can check out my site http://mi6splus.com/xiaomi-mi-6-features… for more info about the same.