Difficulty
Moderate
Steps
6
Time Required
30 minutes
Sections
1
- Xiaomi Mi Curved Gaming Monitor 34" Disassembly
- 6 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackXiaomi Mi Curved Gaming Monitor 34"
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Remove bottom screws
- Lay the monitor down on a soft surface.
- Remove the 6 philips size 1 screws along the bottom.
Lay the monitor down on a soft surface.
Remove the 6 philips size 1 screws along the bottom.
1024
Step 2
Remove front bezel
- Pry off the bezel by carefully pulling away from the screen and down.
Pry off the bezel by carefully pulling away from the screen and down.
Step 3
Remove front LED light conduit
- Take out the small plastic status led light conductor, so you won’t lose it later.
Take out the small plastic status led light conductor, so you won’t lose it later.
Step 4
Remove back screws
- Take out the six philps size 2 screws on the back.
- One is behind a warrenty sticker. Your warrenty will be void after removing this.
Take out the six philps size 2 screws on the back.
One is behind a warrenty sticker. Your warrenty will be void after removing this.
Step 5
Remove back shell
- Insert your prying tool between the border piece and back shell. Pry the border outward, and slightly pull up on the back shell to disconnect the clips.
- If you have a suction cup, that makes removing the top easier.
Insert your prying tool between the border piece and back shell. Pry the border outward, and slightly pull up on the back shell to disconnect the clips.
If you have a suction cup, that makes removing the top easier.
Step 6
Separate LCD and backlight layers
- Set the panel up straight.
- Pull the border slightly out and push it forward to release the plastic clips all around the edge.
- It’s easiest to start at the bottom right or left. You may need the prying tool again for the corner clips.
- Be careful not to separate the layers too far as they are still connected at the bottom with fragile ribbon cables.
- You’ll be able to peek inbetween the layers to blow out dust or insects that got stuck there.
- As you can see I had to turn on the monitor in this state to see the dust, but obviously this is not recommended.
Set the panel up straight.
Pull the border slightly out and push it forward to release the plastic clips all around the edge.
It’s easiest to start at the bottom right or left. You may need the prying tool again for the corner clips.
Be careful not to separate the layers too far as they are still connected at the bottom with fragile ribbon cables.
You’ll be able to peek inbetween the layers to blow out dust or insects that got stuck there.
As you can see I had to turn on the monitor in this state to see the dust, but obviously this is not recommended.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 1 other contributor
Epskampie
Member since: 01/16/2021
193 Reputation
1 Guide authored
Badges:
4
+1 more badge
Thiago Silvestre - Dec 26, 2021
Reply
Is there a way to fix up this monitor cracked screen?
gugula12 - Oct 6, 2022
I cracked screen as well and searching solution))
Oshosanya Michael - Aug 17, 2022
Reply
Where can one get a replacement screen?
cturiel - Oct 3, 2022
Same question…is there any store that sells this part ?
Mehedi Hasan - Nov 24, 2022
Is there any link/store where I can buy the mi 34 inch gaming monitor spare replacement screen? I just broke my one upon 1 week of purchase.