Difficulty

Moderate

Steps

9

Time Required

Suggest a time??

Sections

4

  • Rear Case/Midframe
  • 3 steps
  • Battery
  • 2 steps
  • Motherboard
  • 2 steps
  • Rear Facing Camera
  • 2 steps

Flags

1

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

  • BackXiaomi Mi 4

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Rear Case/Midframe
  • Check to make sure that the device is powered off.
  • Use a pin or paper clip to insert in the hole on the side of the phone next to the micro SIM cardholder to remove the tray.
  • Remove the SIM card tray from the Xiaomi Mi 4 and store it somewhere safe.

Check to make sure that the device is powered off.

Use a pin or paper clip to insert in the hole on the side of the phone next to the micro SIM cardholder to remove the tray.

Remove the SIM card tray from the Xiaomi Mi 4 and store it somewhere safe.

1024

Step 2

  • Using the flat metal spudger and curved metal spudger, make a wedge between the plastic back cover and the inner frame
  • Using the second spudger, slowly work your way around the perimeter of the device
  • Listen for clicking sounds as you are prying the back cover away from the frame
  • As the back cover is almost completely removed, use the suction-cup tool to remove the plastic cover without damaging the back

Using the flat metal spudger and curved metal spudger, make a wedge between the plastic back cover and the inner frame

Using the second spudger, slowly work your way around the perimeter of the device

Listen for clicking sounds as you are prying the back cover away from the frame

As the back cover is almost completely removed, use the suction-cup tool to remove the plastic cover without damaging the back

Step 3

  • Use a 000 phillips head screwdriver to remove the 10 1.2mm phillips head screws in the plastic frame that hold the motherboard and battery.
  • Use a 000 phillips head screwdriver to remove the 3 0.5mm phillips head screws in the plastic frame that hold the motherboard and battery.
  • Use the small plastic opening tool and place it in the slot on the bottom right corner of the inner frame and carefully pry it off.

Use a 000 phillips head screwdriver to remove the 10 1.2mm phillips head screws in the plastic frame that hold the motherboard and battery.

Use a 000 phillips head screwdriver to remove the 3 0.5mm phillips head screws in the plastic frame that hold the motherboard and battery.

Use the small plastic opening tool and place it in the slot on the bottom right corner of the inner frame and carefully pry it off.

Step 4

              Battery
  • Use tweezers to gently disconnect the connections that run across the battery and are connected to the motherboard.
  • Proceed to gently remove the tape like connector from the battery until it is completely off.
  • Use tweezer to disconnect battery’s wire from the motherboard.

Use tweezers to gently disconnect the connections that run across the battery and are connected to the motherboard.

Proceed to gently remove the tape like connector from the battery until it is completely off.

Use tweezer to disconnect battery’s wire from the motherboard.

Step 5

  • Use the plastic opening tool to gently pry the battery out of its casing for removal.

Use the plastic opening tool to gently pry the battery out of its casing for removal.

Step 6

              Motherboard
  • With the battery removed locate the left-hand cable connected to the motherboard. With the tweezers, firmly grasp the wires of the connector and gently disconnect the cable from the motherboard.
  • Find the other cable connecting the motherboard to the device at the top right-hand side of the phone, and carefully use the tweezers to remove that as well.

With the battery removed locate the left-hand cable connected to the motherboard. With the tweezers, firmly grasp the wires of the connector and gently disconnect the cable from the motherboard.

Find the other cable connecting the motherboard to the device at the top right-hand side of the phone, and carefully use the tweezers to remove that as well.

Step 7

  • Wedge the plastic opening tool, between the motherboard and the inner region of the phone in the slot atop the motherboard.

Wedge the plastic opening tool, between the motherboard and the inner region of the phone in the slot atop the motherboard.

Step 8

              Rear Facing Camera
  • With the motherboard removed from the device, turn the motherboard over to face the obverse side.
  • Locate the connector for the rear camera.

With the motherboard removed from the device, turn the motherboard over to face the obverse side.

Locate the connector for the rear camera.

Step 9

  • Grasp the cable with the tweezers and gently pull up and away from the motherboard to disconnect it.

Grasp the cable with the tweezers and gently pull up and away from the motherboard to disconnect it.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      6 other people completed this guide.

Author

                                      with 3 other contributors 


                    William Pendeergraft

Member since: 09/08/2015

2,349 Reputation

                                      4 Guides authored                  



                       Badges:
                       20







                                                        +17 more badges

Team

                       USF Tampa, Team 15-6, Blackwell Fall 2015                        

                                                  Member of USF Tampa, Team 15-6, Blackwell Fall 2015 



                    USFT-BLACKWELL-F15S15G6                     


                                            2 Members                     


                                            10 Guides authored