Difficulty

Moderate

Steps

6

Time Required

                          1 hour

Sections

1

  • Screen
  • 6 steps

Flags

3

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackXiaomi Air 12

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Screen
  • Remove the screws on the back. 1 of them is under the rubber pads in the center
  • Remove the back gently. Screen replacement stick can help. There are several plastic holding it.

Remove the screws on the back. 1 of them is under the rubber pads in the center

Remove the back gently. Screen replacement stick can help. There are several plastic holding it.

1024

Step 2

  • Remove the connectors going to the screen. 2 wifi cables near the battery. One camera cable halfway to the carger. One screen cable on at the HDMI.
  • Remove the screws holding the hinges on the corners. 4 screws holding them.

Remove the connectors going to the screen. 2 wifi cables near the battery. One camera cable halfway to the carger. One screen cable on at the HDMI.

Remove the screws holding the hinges on the corners. 4 screws holding them.

Step 3

  • Turn the hinges upwards till 90 degrees.
  • Remove the screen from the main board.

Turn the hinges upwards till 90 degrees.

Remove the screen from the main board.

Step 4

  • Remove 2 screws from the bottom.
  • pull the screen towards the place of the screws and it will come out.

Remove 2 screws from the bottom.

pull the screen towards the place of the screws and it will come out.

Step 5

  • Remove the screen. Remove the connector cable.
  • Check if the cable was wrong not the whole screen.

Remove the screen. Remove the connector cable.

Check if the cable was wrong not the whole screen.

Step 6

  • Do everything backwards.
  • Connect the cable.
  • Push the new screen away from the places of the screws.
  • Add the screws.
  • Put back the whole together. Turn the hinges back.
  • Add the screws to the holes marked with a triangle.
  • Reconnect the cables to the main board.
  • Put back the lid of the main board.

Do everything backwards.

Connect the cable.

Push the new screen away from the places of the screws.

Add the screws.

Put back the whole together. Turn the hinges back.

Add the screws to the holes marked with a triangle.

Reconnect the cables to the main board.

Put back the lid of the main board.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor 


                    Robin Csutorás

Member since: 04/09/2019

133 Reputation

                                      1 Guide authored                  



                       Badges:
                       2