Difficulty
Moderate
Steps
11
Time Required
15 - 45 minutes
Sections
3
- Rear Casing
- 5 steps
- SSD
- 3 steps
- Battery
- 3 steps
Flags
1
Featured Student Guide
This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.
BackXiaomi Air 12
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Rear Casing
- Orient the computer so the Xiaomi logo is at the bottom of the device.
Orient the computer so the Xiaomi logo is at the bottom of the device.
1024
Step 2
- Insert the plastic opening tool underneath the top-middle rubber covering and lift upwards to reveal the hidden screw.
Insert the plastic opening tool underneath the top-middle rubber covering and lift upwards to reveal the hidden screw.
Step 3
- Remove the eight 3 mm screws using the Torx T5 driver by inserting the screwdriver into each screw and rotating counterclockwise.
Remove the eight 3 mm screws using the Torx T5 driver by inserting the screwdriver into each screw and rotating counterclockwise.
Step 4
- Insert the plastic opening tool into each side of the computer and push the tool downwards to pop open the back cover.
- You will hear popping noises as you remove the cover.
Insert the plastic opening tool into each side of the computer and push the tool downwards to pop open the back cover.
You will hear popping noises as you remove the cover.
Step 5
- Remove the back of the laptop by gently lifting the casing upwards.
Remove the back of the laptop by gently lifting the casing upwards.
Step 6
SSD
- Detach the white and black speaker wires by pulling them from the small black tabs along the perimeter of the metal bracket.
Detach the white and black speaker wires by pulling them from the small black tabs along the perimeter of the metal bracket.
Step 7
- Remove the 1.5mm screw using the JIS #00 screwdriver.
Remove the 1.5mm screw using the JIS #00 screwdriver.
Step 8
- Lift the SSD up from the device and gently pull the SSD from the laptop.
Lift the SSD up from the device and gently pull the SSD from the laptop.
Step 9
Battery
- Detach the red wire from the tabs on the perimeter of the metal bracket.
Detach the red wire from the tabs on the perimeter of the metal bracket.
Step 10
- Use a PH1 screwdriver to remove the five 2mm black screws.
- Remove two silver 1mm JIS #00 screws.
- There will be clear plastic spacers that come off with the silver screws.
Use a PH1 screwdriver to remove the five 2mm black screws.
Remove two silver 1mm JIS #00 screws.
There will be clear plastic spacers that come off with the silver screws.
Step 11
- Lift the battery up and pull out from the device.
- The metal bracket will come out with the battery.
Lift the battery up and pull out from the device.
The metal bracket will come out with the battery.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
7 other people completed this guide.
Author
with 4 other contributors
Hannah Kwan
Member since: 04/18/2018
794 Reputation
5 Guides authored
Badges:
12
+9 more badges
Team
Cal Poly, Team S18-G4, Livingston Spring 2018
Member of Cal Poly, Team S18-G4, Livingston Spring 2018
CPSU-LIVINGSTON-S18S18G4
4 Members
8 Guides authored
Migwell2 - Jan 19, 2020
Reply
I have a problem, the battery do not really charge, 100% is reach in few minutes, and it works less than 15 minutes on battery. Is anybody have a solution ? Bios update maybe ?
Roma Monica Desunia - Mar 28, 2020
Reply
I got to pull out my bloated battery…. Though it could work with just the charger on stand by but it did not… Anyone knows where I can purchase new battery? Can’t bring it to the shop because of quarantine but need to work from home.
sdot - Jun 23, 2020
I removed the bloated battery too. It can’t power on properly. The power light just just on and off around every 5 seconds. Is yours the same?
Anthony Jethro Lieander - Jan 8, 2021
Reply
after I change the battery it always says plugged in not charge, anyone has the same issue?