Xerox C60 Fuser Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          5 minutes

Sections

Fuser
5 steps

Flags

BackXerox C60
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Fuser

Open the main printer door. This gives you access to the transfer case, which you will see in a moment.
The handle to the main door of the printer can be located just under the blue section, on the right hand side of the printer.

Open the main printer door. This gives you access to the transfer case, which you will see in a moment.

The handle to the main door of the printer can be located just under the blue section, on the right hand side of the printer.

1024

Step 2

Grasp the green handle and turn it clockwise to unlock it.
Once the transfer case has been unlocked, it can be opened via pulling the green handle away from the machine.

Grasp the green handle and turn it clockwise to unlock it.

Once the transfer case has been unlocked, it can be opened via pulling the green handle away from the machine.

Step 3

Grab the fuser handle, ensuring that the fuser module itself is not being touched.
Once the transfer module has been pulled out, the fuser will be the large part that will have caution stickers on it, as well as a handle.
The fuser module is HOT!! Grab the handle ONLY!!!
The fuser module may be heavy for some. The person completing the replacement will need roughly the same strength needed to pull the transfer case out from the printer.

Grab the fuser handle, ensuring that the fuser module itself is not being touched.

Once the transfer module has been pulled out, the fuser will be the large part that will have caution stickers on it, as well as a handle.

The fuser module is HOT!! Grab the handle ONLY!!!

The fuser module may be heavy for some. The person completing the replacement will need roughly the same strength needed to pull the transfer case out from the printer.

Step 4

Grab the handle on the fuser, and lift it upward to remove it.
Once the fuser module has been removed, set it gently on the ground, counter, or other surface that will not be affected by the heat.

Grab the handle on the fuser, and lift it upward to remove it.

Once the fuser module has been removed, set it gently on the ground, counter, or other surface that will not be affected by the heat.

Step 5

Once the old fuser has been removed, un-package the new one, and place the new fuser in the space that the old fuser was.
The new fuser will not be hot like the other one, and will be safe to grab in locations other than the handle, though the handle is the easiest place to grasp.

Once the old fuser has been removed, un-package the new one, and place the new fuser in the space that the old fuser was.

The new fuser will not be hot like the other one, and will be safe to grab in locations other than the handle, though the handle is the easiest place to grasp.

To close the printer, simply reverse these steps.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor

                    Breanna Batdorf

Member since: 07/03/2018

151 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       Eastern Washington University, Team S2-G3, Crane Summer 2018                        

                                                  Member of Eastern Washington University, Team S2-G3, Crane Summer 2018 



                    EWU-CRANE-SU18S2G3                     


                                            3 Members                     


                                            3 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team