Difficulty
Moderate
Steps
3
Time Required
Suggest a time??
Sections
1
- Back Cover
- 3 steps
Flags
2
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Missing Details
Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.
BackXelio P1001A-BK
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
There are four securing tabs along both long sides of the tablet shells which are disengaged by gently prying them apart with an opening tool. The speakers reside in two housings on the back shell half and connect to the motherboard with two very thin wires each. The tablet speakers have magnets on their backs which should make them stick to the metal shell protecting the back of the screen. However, if the speakers stay attached to the back shell half, gently pry them out of the sockets before completely separating the shell halves.
What you need
Step 1
Back Cover
- With a Phillips #0 screwdriver, remove the two 3 mm retaining screws from the side of the tablet.
With a Phillips #0 screwdriver, remove the two 3 mm retaining screws from the side of the tablet.
1024
Step 2
- Using the plastic opening tool, disengage the securing tabs that are along the two long sides of the tablet, four on each side.
- Slowly rotate up the side of the tablet opposite from the control buttons.
Using the plastic opening tool, disengage the securing tabs that are along the two long sides of the tablet, four on each side.
Slowly rotate up the side of the tablet opposite from the control buttons.
Step 3
- Before fully separating the shell halves, observe if the speakers are separated from the shell half.
- If they are, the shell half can be fully separated from the front shell half.
- If they are still in their sockets, gently pry them loose with the plastic opening tool.
Before fully separating the shell halves, observe if the speakers are separated from the shell half.
If they are, the shell half can be fully separated from the front shell half.
If they are still in their sockets, gently pry them loose with the plastic opening tool.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Josh Saenz
Member since: 03/11/2015
316 Reputation
3 Guides authored
Badges:
7
+4 more badges
Team
Colorado Springs, Team 4-2, Panko Spring 2015
Member of Colorado Springs, Team 4-2, Panko Spring 2015
UCCS-PANKO-S15S4G2
3 Members
12 Guides authored