Difficulty
Moderate
Steps
7
Time Required
5 - 10 minutes
Sections
2
- Faceplate
- 5 steps
- D-Pad
- 2 steps
Flags
0
BackXbox One Wireless Controller Model 1537
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery Pack
- Remove the battery pack cover.
- Remove batteries.
Remove the battery pack cover.
Remove batteries.
1024
Step 2
Side Handles
- We recommend using a nylon spudger for this step. A metal spudger is shown.
- Grip the controller firmly to remove the side handles, wedging a spudger into the seam between the front and handle plates.
- Pry the side plate away from the front plate by moving the spudger back and forth. You will need to do this all the way around the side plate’s seam.
We recommend using a nylon spudger for this step. A metal spudger is shown.
Grip the controller firmly to remove the side handles, wedging a spudger into the seam between the front and handle plates.
Pry the side plate away from the front plate by moving the spudger back and forth. You will need to do this all the way around the side plate’s seam.
Step 3
Screws
- There is a hidden screw located in the middle of the controller behind the label.
- Use a screwdriver and punch a hole directly in the center of the label.
- You may also lift the label if you do not want to puncture it.
- Remove the five 10mm screws located on the back of the controller using the T8 Security Torx Screwdriver.
There is a hidden screw located in the middle of the controller behind the label.
Use a screwdriver and punch a hole directly in the center of the label.
You may also lift the label if you do not want to puncture it.
Remove the five 10mm screws located on the back of the controller using the T8 Security Torx Screwdriver.
Step 4
Backplate
- Remove the backplate.
Remove the backplate.
Step 5
Faceplate
- Remove the faceplate.
Remove the faceplate.
Step 6
Metal Frame
- Pry off the metal frame around the D-Pad.
Pry off the metal frame around the D-Pad.
Step 7
D-Pad
- Lift the D-Pad out of its housing.
Lift the D-Pad out of its housing.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
44 other people completed this guide.
Author
with 7 other contributors
Garrett George
Member since: 01/22/2015
5,748 Reputation
3 Guides authored
Badges:
19
+16 more badges
Team
Cal Poly, Team 20-15, Maness Winter 2015
Member of Cal Poly, Team 20-15, Maness Winter 2015
CPSU-MANESS-W15S20G15
5 Members
50 Guides authored
Arief Hidayat - Apr 9, 2016
Reply
Can you show me how to replace xbox one controller 3.5mm stereo jack dpad
Brandon - Apr 7, 2018
This model of the xbox one controller does not feature a 3.5mm headphone jack. Please look at the guides for later models of the xbox one controller.
David Schmidt - Oct 3, 2016
Reply
it’s exactly the same like shown above :)
Bob - Dec 24, 2017
Reply
How do u fix one of the silver things behind the d-pad?
How do fix the silver things behind each d-pad