Difficulty
Moderate
Steps
2
Time Required
45 minutes
Sections
1
- Speaker
- 2 steps
Flags
0
BackX-Treme Tablet Generation 2
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Speaker
- Using a spudger and pry tool, remove the back cover. Start at the top corner, and carefully pry the back cover off of the main body.
- Continue around the device, being careful to not dislodge the power button.
Using a spudger and pry tool, remove the back cover. Start at the top corner, and carefully pry the back cover off of the main body.
Continue around the device, being careful to not dislodge the power button.
1024
Step 2
- Using a solder vacuum and soldering iron, release the red wire from the motherboard first, then release the black wire.
- The speaker is held on the back cover with adhesive tape. Using a pry tool, carefully pry the speaker from the back cover.
Using a solder vacuum and soldering iron, release the red wire from the motherboard first, then release the black wire.
The speaker is held on the back cover with adhesive tape. Using a pry tool, carefully pry the speaker from the back cover.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 6 other contributors
Kristen John
Member since: 01/26/2015
125 Reputation
1 Guide authored
Badges:
5
+2 more badges
Team
Pasco Hernando, Team 5-4, Prince Winter 2015
Member of Pasco Hernando, Team 5-4, Prince Winter 2015
PHSC-PRINCE-W15S5G4
6 Members
4 Guides authored