X Street Str Viper Remote Control Motherboard Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          15 minutes            

Sections

1

• Remote Control Motherboard
• 5 steps

Flags

0

• BackX-Street STR Viper

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Remote Control Motherboard               

• Turn off the remote control. Flip power switch to the off position.
• Remove the battery from bottom of the remote control for further safety measures.

Turn off the remote control. Flip power switch to the off position.

Remove the battery from bottom of the remote control for further safety measures.

1024

Step 2

• Remove all seven 3mm Phillips #2 screws from the underside panel.

Remove all seven 3mm Phillips #2 screws from the underside panel.

Step 3

• Remove five 3mm Phillips #2 screws that connect the motherboard to the back outer shell.

Remove five 3mm Phillips #2 screws that connect the motherboard to the back outer shell.

Step 4

• Detach the motherboard. Use soldering tools to desolder the red and black wires from the motherboard. To do this, refer to the how to solder/desolder page.

Detach the motherboard. Use soldering tools to desolder the red and black wires from the motherboard. To do this, refer to the how to solder/desolder page.

Step 5

• Replace the motherboard. Solder the wires back on to the new motherboard using the soldering kit. The black wire should be on the left and the red wire should be on the right.

Replace the motherboard. Solder the wires back on to the new motherboard using the soldering kit. The black wire should be on the left and the red wire should be on the right.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 7 other contributors 

                    Cate Kraska                     

Member since: 04/01/2015

129 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       Cal Poly, Team 12-6, Lancaster Spring 2015                        

                                                  Member of Cal Poly, Team 12-6, Lancaster Spring 2015 



                    CPSU-LANCASTER-S15S12G6                     


                                            4 Members                     


                                            6 Guides authored