Difficulty
Moderate
Steps
15
Time Required
25 minutes
Sections
4
- Battery
- 2 steps
- Underbody
- 9 steps
- Steering Column
- 1 step
- Steering Column Spring
- 3 steps
Flags
0
BackX-Street Lamborghini Murcielago LP670-4 SV
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Unscrew the two 2.5mm Phillips #00 screws from the middle of the car.
- Unclip the two clips to remove the battery cover.
Unscrew the two 2.5mm Phillips #00 screws from the middle of the car.
Unclip the two clips to remove the battery cover.
1024
Step 2
- Unplug the battery by pushing on the clip.
Unplug the battery by pushing on the clip.
Step 3
Underbody
- Unscrew the two 2.5mm Phillips #00 screws from each side
Unscrew the two 2.5mm Phillips #00 screws from each side
Step 4
- Remove the side skirt covers on each side of the car.
Remove the side skirt covers on each side of the car.
Step 5
- Lift up and remove the two side skirts.
Lift up and remove the two side skirts.
Step 6
- Unscrew the two 2.5mm Phillips #00 screws from the front skirt of the car.
Unscrew the two 2.5mm Phillips #00 screws from the front skirt of the car.
Step 7
- Lift the front part of the underbody and pull it out from the main underbody.
Lift the front part of the underbody and pull it out from the main underbody.
Step 8
- Unscrew the remaining seven 9mm Phillips #00 screws from the underbody of the car.
- The second image shows a closer view of the rear three screws
Unscrew the remaining seven 9mm Phillips #00 screws from the underbody of the car.
The second image shows a closer view of the rear three screws
Step 9
- Lift the main underbody from the shell of the car.
- Lift up the body to expose the wiring and hardware underneath.
Lift the main underbody from the shell of the car.
Lift up the body to expose the wiring and hardware underneath.
Step 10
- Remove the reflective sticker from the top of the body.
Remove the reflective sticker from the top of the body.
Step 11
- Unplug the wire connector.
Unplug the wire connector.
Step 12
Steering Column
- Unscrew the three 2.5mm Phillips #00 screws from the white steering column.
- After removing the three screws, the steering column will pop out of position because of the springs underneath. To reassemble, put the springs back together as shown in picture #3.
Unscrew the three 2.5mm Phillips #00 screws from the white steering column.
After removing the three screws, the steering column will pop out of position because of the springs underneath. To reassemble, put the springs back together as shown in picture #3.
Step 13
Steering Column Spring
- Remove the three 1.6mm Phillips #000 screws from the black motor casing.
Remove the three 1.6mm Phillips #000 screws from the black motor casing.
Step 14
- Remove the front motor and its casing from the chassis of the car.
Remove the front motor and its casing from the chassis of the car.
Step 15
- Carefully remove the steering column spring.
Carefully remove the steering column spring.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Liam Martinez
Member since: 04/01/2015
556 Reputation
5 Guides authored
Badges:
11
+8 more badges
Team
Cal Poly, Team 24-3, Lancaster Spring 2015
Member of Cal Poly, Team 24-3, Lancaster Spring 2015
CPSU-LANCASTER-S15S24G3
3 Members
9 Guides authored
