Difficulty
Difficult
Steps
13
Time Required
30 - 40 minutes
Sections
3
- Battery
- 2 steps
- Underbody
- 9 steps
- Motherboard
- 2 steps
Flags
0
BackX-Street Lamborghini Murcielago LP670-4 SV
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Unscrew the two 2.5mm Phillips #00 screws from the middle of the car.
- Unclip the two clips to remove the battery cover.
Unscrew the two 2.5mm Phillips #00 screws from the middle of the car.
Unclip the two clips to remove the battery cover.
1024
Step 2
- Unplug the battery by pushing on the clip.
Unplug the battery by pushing on the clip.
Step 3
Underbody
- Unscrew the two 2.5mm Phillips #00 screws from each side
Unscrew the two 2.5mm Phillips #00 screws from each side
Step 4
- Remove the side skirt covers on each side of the car.
Remove the side skirt covers on each side of the car.
Step 5
- Lift up and remove the two side skirts.
Lift up and remove the two side skirts.
Step 6
- Unscrew the two 2.5mm Phillips #00 screws from the front skirt of the car.
Unscrew the two 2.5mm Phillips #00 screws from the front skirt of the car.
Step 7
- Lift the front part of the underbody and pull it out from the main underbody.
Lift the front part of the underbody and pull it out from the main underbody.
Step 8
- Unscrew the remaining seven 9mm Phillips #00 screws from the underbody of the car.
- The second image shows a closer view of the rear three screws
Unscrew the remaining seven 9mm Phillips #00 screws from the underbody of the car.
The second image shows a closer view of the rear three screws
Step 9
- Lift the main underbody from the shell of the car.
- Lift up the body to expose the wiring and hardware underneath.
Lift the main underbody from the shell of the car.
Lift up the body to expose the wiring and hardware underneath.
Step 10
- Remove the reflective sticker from the top of the body.
Remove the reflective sticker from the top of the body.
Step 11
- Unplug the wire connector.
Unplug the wire connector.
Step 12
Motherboard
- Desolder all wires connected to the motherboard.
- In this step, you will have to take great care in keeping track of the wires
- Our suggestion is to attach tape to each wire, and letter the tape. Letter each tape according to the respective lettering found on the motherboard.
Desolder all wires connected to the motherboard.
In this step, you will have to take great care in keeping track of the wires
Our suggestion is to attach tape to each wire, and letter the tape. Letter each tape according to the respective lettering found on the motherboard.
Step 13
- Unscrew the two 1.6mm Phillips #000 screws connecting the motherboard to the under body of the car.
Unscrew the two 1.6mm Phillips #000 screws connecting the motherboard to the under body of the car.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 4 other contributors
Alex Borsotti
Member since: 04/01/2015
121 Reputation
1 Guide authored
Badges:
5
+2 more badges
Team
Cal Poly, Team 24-3, Lancaster Spring 2015
Member of Cal Poly, Team 24-3, Lancaster Spring 2015
CPSU-LANCASTER-S15S24G3
3 Members
9 Guides authored
mmekawtar - Mar 18, 2017
Reply
Hello I need to buy new circuit, can u guide me to any webstore? Thanx
